SpaceWagon
Active Member
Original factory installed "905" A/C for Forward Look cars
Have it posted over on the Forward Look Forum. Here is a link to my post with all of the details and pictures.
All parts are Original. This is the COMPLETE A/C system. Removed from a 1960 Dodge with 318 poly V-8 engine.
Everything needed to add correct factory A/C set-up
Includes ALL of the following parts:
> Underdash heater / A/C box [Model 950]
> Firewall mounted main box [Model 905]
> Compressor (spins freely)
> Idler Pulleys (spin freely)
> Condenser with evap lines
> Drier and all lines
> Mounting brackets to engine
> Cables, vacuum lines and ALL original mounting bolts/ clips and fasteners
> Water control valves (2)
Both of the fiberglass housings are in good condition. No broken or missing areas. Some minor cracks at a few mounting locations.
Local Pick-up due to size and number of parts
$500 for entire system - Open to Offers
Have it posted over on the Forward Look Forum. Here is a link to my post with all of the details and pictures.
All parts are Original. This is the COMPLETE A/C system. Removed from a 1960 Dodge with 318 poly V-8 engine.
Everything needed to add correct factory A/C set-up
Includes ALL of the following parts:
> Underdash heater / A/C box [Model 950]
> Firewall mounted main box [Model 905]
> Compressor (spins freely)
> Idler Pulleys (spin freely)
> Condenser with evap lines
> Drier and all lines
> Mounting brackets to engine
> Cables, vacuum lines and ALL original mounting bolts/ clips and fasteners
> Water control valves (2)
Both of the fiberglass housings are in good condition. No broken or missing areas. Some minor cracks at a few mounting locations.
Local Pick-up due to size and number of parts
$500 for entire system - Open to Offers
Last edited:
