Fuel Pump to Carb Fuel Line - Where to Buy??

[Wile E Coyote]

72 Imperial.
Holley Carb.
Does anyone sell the fuel pump to carb fuel line?

Thanks,
Ron

 

[Fratzog]

Bend your own? Did that for my 750 Eddie.

 

[53ryder]

Where's the one that came with the car?

Glenn

 

[67Monaco]

Love the ride BTW...

 

[1978 NYB]

Beautiful car!!!

 

[Big_John]

I'll bet that any repop 440 fuel line for a Holley carb will work.

http://www.ebay.com/itm/68-69-70-71...Parts_Accessories&hash=item5af0b408cf&vxp=mtr

http://www.ebay.com/itm/67-72-Mopar...Parts_Accessories&hash=item58bb98b9f9&vxp=mtr

 

[Big_John]

Of course... some 5/16" brake line from your local NAPA and a little patience, you could bend your own.

 

[Dan Scully]

Fuel Line

Of course... some 5/16" brake line from your local NAPA and a little patience, you could bend your own.

This style of Poly line you can bend by hand and is almost impossible to kink. Napa and most of the parts store carry it.

 

[detmatt]

I got mine from Inline Tube.

 

[Wile E Coyote]

Where's the one that came with the car?

Glenn

Hey! How exactly is a rainbow made? (Joe Dirt)

There was a faulty Holley Projection unit on the car when I bought it. Original carb was in a box and no fuel line.

 

[Wile E Coyote]

I'll bet that any repop 440 fuel line for a Holley carb will work.

http://www.ebay.com/itm/68-69-70-71...Parts_Accessories&hash=item5af0b408cf&vxp=mtr

http://www.ebay.com/itm/67-72-Mopar...Parts_Accessories&hash=item58bb98b9f9&vxp=mtr

Thanks Big John, I never think to check eBay.

 

[commando1]

Thankfully for us, if it was also on B & E bodies, we luck out by default. They weren't made in the first place with us in mind.

 

[Wile E Coyote]

I got mine from Inline Tube.

I checked their website before posting this; I couldn't find my exact model so I assume it's unavailable. I suppose I should call them. Thanks!

 

[Edison]

This style of Poly line you can bend by hand and is almost impossible to kink. Napa and most of the parts store carry it.

I had to bend some of that stuff when I did my fuel pump and the old line had rounded off when trying to remove it from the pump, and I kinked a couple before getting it right. This was for the small section from pump to filter. I eventually broke down and bought a pipe bender and got it done.

 

[bluefury361]

I checked their website before posting this; I couldn't find my exact model so I assume it's unavailable. I suppose I should call them. Thanks!

When the engines came off the carousel at Trenton they weren't yet assigned a car, so this fuel line should be the same across the car lines.