Is this what I think it is

['69FuryIIIConvertible]

Found this hiding out.

Nick

 

[Bryan]

Looks like a early to mid 60's 361 (maybe 383) with truck or industrial exhaust manifolds and autolite 2 bbl carb.

 

[commando1]

Stationary generator.

< Sent from my tablet >

 

[Bryan]

Stationary generator.

< Sent from my tablet >

I thought it might be a tug at first, but think you are correct based on the carb linkage and bell housing.

 

[Newp]

Found this hiding out.

Nick

My guess is. No.

 

[has2bmopar]

It would be a 361 industrial/truck engine... The location and angle of the plugs are much like a smallblock.

They made this and the same style RB 413 through '78 for straight trucks, and various industrial uses.

 

[70NPORT]

The plug locations/angles are the first thing I noticed.

 

[commando1]

I still say.........

The Rockford Power Take-Off is a dead give-a-way on that 413 industrial.

 

[70NPORT]

I still say.........

With Cherry Bombs too, lol.

 

[68plymouth383]

Man Stan when that engine gets humming it will catch the grass on fire!!! They should have cut the pipes a little higher!

I still say.........

 

[1978 NYB]

What is it used for......driving an irrigation pump on a farm?

 

[commando1]

You nailed it.
And we still got a lot of old industrial hemis down here, too.

 

[1978 NYB]

Keep them oiled and cooled and they'll last forever.

 

[70NPORT]

Wow, will you look at that.......ancient. Where was Caterpillar around at that time???

 

[polara71]

You fellows never cease to amaze me with the knowledge and things you come up with

 

[bluefury361]

Stationary engine.....

I found this in an old barn near here. It is a 1926 Dodge brothers engine & trans used to operate a big drum winch, used in a saw mill.

 

[detmatt]

Bob you remember the Hemi powered air raid siren at the museum, you get a picture of it?
https://www.google.com/search?q=hem...AQ&biw=1024&bih=644#biv=i|2;d|WwYkX6Ne8F0tWM:

 

[polara71]

I found this in an old barn near here. It is a 1926 Dodge brothers engine & trans used to operate a big drum winch, used in a saw mill.

Un-efin-believeable

 

[cm23uoc]

They cut down top end Mercedes, Horch and Maybachs for example after the war in Germany to turn them into driveable sawmills, a few are still there in museums or at farm equiment shows, some got reversed back to original.

 

[commando1]

Un-efin-believeable

Hey, in another 15 years you too will be....

And how about the original Mopar 413 Industrial.
It was a six:

https://picasaweb.google.com/sixpics/52DodgeBigSix?authkey=Gv1sRgCKak_u_Z4drLBQ