New C-Body Emblems

[1970300vert]

I have been looking for a good set of the Chrysler letter for the 1970 300 and a couple other but they are very difficult to find.

Yes 70 300 parts are needed for sure. Are these the letters you’re looking for. On the 70 300 these are not separated letters but just two “Three Hundred”. Really appreciate that you are making an effort for C body parts.

 

[YEARONE]

Yes 70 300 parts are needed for sure. Are these the letters you’re looking for. On the 70 300 these are not separated letters but just two “Three Hundred”. Really appreciate that you are making an effort for C body parts.

View attachment 724637

We will have these in a couple of weeks as they are in plating. Thanks. The Chrysler letters that are on the 300H truck lid are on my list and I have a few Chrysler script emblems that are in the waiting to do list.

 

[YEARONE]

The part number on the back of those emblems is not what Mopar had listed in the parts book so that made them very hard to find. Chrysler made that same emblem with a different pin location for 1968 and people have those listed for 1970 on ebay and other places. Your emblem fits 1970 trunk lid and 1971 fender on 300's

 

[YEARONE]

these are the only 1970 emblems that I do not have

2898838​		DECKLID C	HURST, HOOD NY
2898839​		DECKLID H	HURST, HOOD NY
2898840​		DECKLID R	HURST, HOOD NY
2898841​		DECKLID Y	HURST, HOOD NY
2898842​		DECKLID S	HURST, HOOD NY
2898843​		DECKLID L	HURST, HOOD NY
2898844​		DECKLID E	HURST, HOOD NY
​
3444181​		FENDER CHRYSLER SCRIP	CONV

 

[ScottinSF]

A dedicated C-body catalog would definitely be appreciated.

 

[SuperDave]

Do you have the chrome Chrysler script?

 

[Buster]

Just received my 300 emblems. Stunning…..congrats!
Will look forward to the rear emblem around the trunk keyhole when you get there.

 

[YEARONE]

Just received my 300 emblems. Stunning…..congrats!
Will look forward to the rear emblem around the trunk keyhole when you get there.

Thanks I'm glad you like them. the THREE HUNDRED trunk lid emblems are in route and we should have them Monday. They are live on our website now

 

[YEARONE]

Yes 70 300 parts are needed for sure. Are these the letters you’re looking for. On the 70 300 these are not separated letters but just two “Three Hundred”. Really appreciate that you are making an effort for C body parts.

View attachment 724637

These are live on our website now, they should be here Monday or Tuesday of next week.

 

[YEARONE]

Do you have the chrome Chrysler script?

I have a couple of different ones but still decoding them to see what all they fit and the supersede trail. The ones I currently have are 3444196 and 2901359. The parts books show 3444181 for 1970 , 3445251 for 1971, 2840010 for 1968 , I do not have any of these.

 

[1970300vert]

These are live on our website now, they should be here Monday or Tuesday of next week.

How about some center caps for C Body road wheels? Maybe the correct LH lug nuts also . I can pretty much guarantee you would have a lot of orders for the center caps and lugnuts.

 

[Love Shack]

Those wheel centers and caps for sure !
How about the ‘Chrysler’ script for the back bumper of the ‘70 Newport ?
Also front and rear bumper guard replacement rubber for the same ?
Thanks !!

 

[YEARONE]

How about some center caps for C Body road wheels? Maybe the correct LH lug nuts also . I can pretty much guarantee you would have a lot of orders for the center caps and lugnuts.

View attachment 724934

We have made the LH thread lug nuts for years our part number FD725LH. As for the center cap I will look into that, what years does it come on?

​

 

[YEARONE]

Those wheel centers and caps for sure !
How about the ‘Chrysler’ script for the back bumper of the ‘70 Newport ?
Also front and rear bumper guard replacement rubber for the same ?
Thanks !!

Do you have an emblem that you could give me the part number off the backside?

 

[Big_John]

We have made the LH thread lug nuts for years our part number FD725LH. As for the center cap I will look into that, what years does it come on?

​

This might be worth starting a new thread on these road wheel centers. That way you could catch the eye of some guys that now them inside and out.

I think they started in 1969 or 70. They are two pieces as shown in this pic of one I did a Heli-Coil thread on. There's some variations that I think were just a different center with the same outer portion in later cars and AMC cars. My knowledge on these is limited, so someone else can give more accurate info.

I do know that the earlier centers are the ones guys seem to want, even for the later cars.

 

[Big_John]

One other thing, and the tooling would be out there for 95% of the piece, is the exhaust tips on a '70/71 Sport Fury GT. I think the only difference with the E- body tip and the C-body tip is the hanger and the inlet pipe. Possibly flipped over too.

Although they never came on the 300Hurst, lot's of folks think they did because of a promo pic that was circulated. I've said that if I had a 300Hurst, and they were available, I'd add them.
Ebody on left, C-body on right. These aren't mine, I got the pic from a post by a member that passed.

 

[YEARONE]

One other thing, and the tooling would be out there for 95% of the piece, is the exhaust tips on a '70/71 Sport Fury GT. I think the only difference with the E- body tip and the C-body tip is the hanger and the inlet pipe. Possibly flipped over too.

Although they never came on the 300Hurst, lot's of folks think they did because of a promo pic that was circulated. I've said that if I had a 300Hurst, and they were available, I'd add them.
Ebody on left, C-body on right. These aren't mine, I got the pic from a post by a member that passed.

View attachment 724998

I will run this by Accurate LTD as they are who we use on all of our exhaust tips.

 

[1968Chryslers]

Yes 70 300 parts are needed for sure. Are these the letters you’re looking for. On the 70 300 these are not separated letters but just two “Three Hundred”. Really appreciate that you are making an effort for C body parts.

View attachment 724637

These same "Three Hundred" emblems fit '68 300's as well, on the C pillars of 2 doors and on the rear quarters of convertibles and 4 dr. HT's.

 

[Rubatoguy]

Chrysler script trunk emblems would be nice. Also having C body be a valid selection on the Year One website as well as 300 being a valid model for '71 Chrysler.

 

[YEARONE]

Chrysler script trunk emblems would be nice. Also having C body be a valid selection on the Year One website as well as 300 being a valid model for '71 Chrysler.

View attachment 725261

do you know what the part number on the backside of that emblem is? I may have one of those that we will be making