danno54
New Member
This kit will repair the hinge on various C body models. If your hinge looks like the one in the photo then this kit is correct. This is a high quality kit. The roller is made from O-1 tool steel that has been properly heat treated to 55 - 57 HRc. This is very important because the original stop arm that rides on the roller is equally hard and if the roller is made from soft low carbon steel, like the inferior ones that are currently made in China, it will eventually develop a groove in it. Each kit includes one roller, one roller axle pin and one spring. The original Mopar roller was case hardened and, if there is a lack of lubrication, the very hard stop arm can eventually wear through the thin hardened case of the roller and wear a groove in the roller body once it reaches the soft steel underneath. Since the roller in this kit is through hardened this process will not occur. So this kit is top quality. I made this batch by request and I'm not sure if I'll make more after these 11 are gone. If anyone wants to pick a kit up I'm located in Waukegan Illinois 60085. The photo of the hinge is for illustration only and it is not included in the sale. You will receive one hardened roller, one axle pin and one spring per kit. The price for each kit is $45 and I'll pay for the shipping. I can accept Paypal or USPS money order.
