For Sale PARTING OUT 1970 plymouth fury lll 4 door running 318

[tqfastfish]

Anybody know how to take the dash pad off ??

 

[polara71]

Yes..... A lot of.. I believe 3/8 bolts to the frame... Screws on the defroster exits, the side and the itstrument panel area.

 

[tqfastfish]

ok thanks , Im new to c bodies . no removal of cluster or windshield right?

 

[polara71]

The cluster yes... But that's all part of the screws I mentioned in and around the cluster area. Don't be intimidated... Its simple.

No, the windshield can stay in.... Thinking about that I now think those may be small bolts but either way the glass can stay. I have removed and installed a few without the glass coming out

 

[tqfastfish]

ok good and thanks alot

 

[polara71]

There are those that will chime in and make a reference to loostening up the two bolts that hold the dash frame in so you can roll the whole assembly down but I have never done it that way and don't know what is involved

 

[tqfastfish]

I got some things off.

4 door panels- Nice condition - 1 is separating at the bottom but that's it , very nice condition

window cranks and vent window cranks- no pitting, all very nice condition with black bezal

PLYMOUTH hood letters- all nice condition . 2 letters with 1 broken stud, they still fasten on the hood fine

lock knobs--- all nice black condition lock knobs

4 nice inside door handles, No pitting

Front arm rest bases- good condition ,Just the bases , the pads are already sold

Rear armrest bases and nice black pads- Nice condition

Inner fenderwell/cowl braces

hood latch release and pop knob- good working condition

all side trim in nice condition- quarters/doors/fenders

rear seat - Really good condition other then the top tan part is a little ripped up, other then that it is very nice.

 

[tqfastfish]

Trim

 

[tqfastfish]

got the carburetor and valve covers off and I have to say that they are in very nice new-used condition , the plug wires are semi-new and worked great, anybody want them?

 

[1969vert500]

How are the floor pans and trunk pan? I am needing those if you want to break out the sawzall

 

[tqfastfish]

the trunk and floor pans are nice .. pm coming

 

[tqfastfish]

Still have lots left

 

[MrMoparCHP]

How are the floor pans and trunk pan? I am needing those if you want to break out the sawzall

The best way to remove the floor is to drill out all the spot welds.

Alan