WANTED Rocker Panel Molding Clips
- Thread starter 70Chrysler300Guy
- Start date
- Status
How many do you need?
70Chrysler300Guy
New Member
Seven in total.
The short ones for the fender and rear quarter pop up here and there as the were used in later cars too. The long ones for the rocker are tougher to come by. It took me a while to find enough good ones for my car.
Part# is 6002611 for the long ones and 6002601 for the short clips.
Part# is 6002611 for the long ones and 6002601 for the short clips.
I commented on your sill moldings in your first post. The ones in your photos looks like they are from a Newport, not a 300. You might want to check on what you have and whether you want the correct 300 moldings before you seek the proper clips, as the Newport moldings are more narrow than those on the 300 and the clips need to match which ever moldings you keep on the car.
70Chrysler300Guy
New Member
You raise a good point. I have not yet identified whom restored this car. I know the wheel lip moldings are not 300's when compared to a 1970 4 dr hardtop at a recent The Old US 27 Motor Tour I attended. My rocker panel moldings appeared correct but I will have to recheck that out. Thank you. I have been to Painters Supply to reviewed their display of body clips but did not see anything close to what I need.
Funny thing is I show Dealerstock on the short clips in Quebec nothing on the long clips. I'll brush up on my French and make an inquiry FWIW
I've bought short NOS clips from a couple places and got some used ones here and there. I think the short clips were also used on a Cordoba.
barnfind
Old Man with a Hat
The longer ones from a 69 300 match up to a 70 300
Now I have multiple reasons to grab them lol the '70 and the '78. "Allo? Parlez-vous anglish?
- Status
Similar threads
