Found Rocker trim clips ‘68 300

[ChryslerCaptain]

I need some of the pictured clips that hold the rocker panel trim on my 68 300. Not sure exactly how many I need yet. I would guess around a dozen, but I’ll take what I can get.

Thanks!
-Josh

 

[FURYGT]

Same clips were used on 68 Sport Fury’s.

 

[cbarge]

Same clips were used on 68 Sport Fury’s.

...and 68 Monaco.

 

[Huntnm2001]

Pretty sure I bought mine from Vans. They were listed for a 68 coronet I believe. But they fit my sport fury.

 

[PH27L7]

The mopar part # is 6001786 but it doesn't appear to be reproduced. It appears the 66-67 Charger clip is still made but requires a spacer for proper fit.

Looking for these nylon molding retaining clips for a '68 Chrysler. So far no luck...

I may have a few of these stashed somewhere but they were fragile even way back when. There should be 10 used on each side. There should be other universal clips that would work or something could be fabricated if all else fails.

 

[MOVE N UP]

I have 12 in good shape with the screws - four have the locator pin missing-but easily remedied by drilling them out and using a small screw as a substitute.
How does $50 shipped sound?

 

[Huntnm2001]

I used these

Rocker Molding Clips 1967 Coronet RT, 1965 Coronet 500, 1966-1967 Charger B-Body