Transmission Line

[Furyus67]

I am looking for new transmission lines for my 67 Fury III 2dr hardtop 318/727.

Inline tube doesn't have anything listed for the car. Also their sales said they don't carry anything for it. I see they have the lines for the 1968. Would they work on my car?
1968 Plymouth Fury I II III Sport Fury Trans Cooler Lines, OE Steel

Classic tube carries the lines for a 66 Sport Fury III. Would they work?
https://classictube.com/product/plymouth-sport-fury-iii-transmission-lines-sold-in-pairs-1966/

 

[Davea Lux]

The '67-'68 lines are the same.

Dave

 

[HWYCRZR]

Be careful I think they’re even a little different between the different radiators ( AC vs Non AC) I ordered both the ‘67 and ‘68 they were different. And neither were a direct fit for my non ac radiator.
I had to do some bending to make them fit. ‘68 Polara.
Edit. Sorry I didn’t see it was a 318. I have 383.

 

[Davea Lux]

Be careful I think they’re even a little different between the different radiators ( AC vs Non AC) I ordered both the ‘67 and ‘68 they were different. And neither were a direct fit for my non ac radiator.
I had to do some bending to make them fit. ‘68 Polara.

The A/C cars were usually 26" radiators which meant a slightly wider hook up point on the bottom of the radiator, it will be close enough to work, But as noted you may need to tweak it a bit.

Dave

 

[Furyus67]

Great. Thanks guys. I'll give the 68 lines a try.

 

[jason99]

Inline Tube will duplicate yours if they aren’t completely shot. Just send them in and get a direct copy back.

 

[67 ragtop]

I got a set for my 67 from Summit Racing, mine is a 67 with a 383. They were made for the 22 inch Radiator but fit the 26 with no issue just slightly straighten one bend.
Right Stuff Detailing Automatic Transmission Cooler Lines RTC6602