Upper Weatherstrip - 1973 Chrysler NYB 2 Dr Hardtop

[IronMighty]

Suspect the answer is "obsolete/not available" but am presently tackling the rear side windows on my 2door Hardtop which had been "decommissioned" at some stage(as in the switches disconnected and connectors cut off). So stripped it down and got the motor off and tested that, it functions fine although am cleaning that and regreasing the mechanism.

Lowered the glass(driver side) and there's lots of corrosion and oxidisation of the remaining mechanism but it's complete and recoverable. However I'm looking at the upper seal(the one that runs along the A pillar and all along the roof rail), the seal that mounts on the quarter glass(as the 'B' pillar) and to establish whether there's a scraper seal?

 

[ayilar]

If you find it, let us know! I've been looking for several years without luck -- see the post below and the linked threads in that post:

1972 Newport Sedan HELP where do I get new Weatherstripping/door-Seals?

 

[IronMighty]

If you find it, let us know! I've been looking for several years without luck -- see the post below and the linked threads in that post:

1972 Newport Sedan HELP where do I get new Weatherstripping/door-Seals?

Thanks - other query is if anyone has an image of what the profile should look like?

 

[IronMighty]

Given quite how deteriorated my seals were I'm taking a gamble and going to try and make early 70s Challenger seals work. The fixing on the start of the A pillar looks about the same, but first I need to clean loads of silicone from the roof rail.
The profile isn't too far apart and fresh foam rubber should work better than stiff and perished ones.