Wollfen's 1970 Plymouth Sport Fury S23

All welds ground back and now it is all sealed, the rust work in the front is done! On to the rear window now.

cowl work7.jpg
 
Amazing, Gary. I admire your courage, determination and skills. A project like this is certainly not for the faint of heart.
 
live4theking said:
Gary,
Are you going to do something to clean up the surface rust inside the car before putting it back together?
Click to expand...
Yes I will, right now though I am focusing on rust holes and replacement of metal before it gets too cold, then I will hit the areas with surface rust, clean it all off and seal it same as I did with the cowl area.
 
So I cut out some replacement pieces of rear window and sat them in place, looks good for when I get ready to cut and weld.

Rear window work.jpg
 
oliver said:
Are these pieces from the white New Yorker?
Click to expand...
Yes they are and yes they conform to the same curves, a hardtop roof to a coupe. The top piece sitting on the roof is out of the side channel and will need a little adjustment to the top edge shape only, the channel itself matches.
 
You must log in or register to reply here.

Similar threads

67newport
NOT MINE 1970 Plymouth fury Sport $6,000
Replies
3
Views
3K
68PK21 440.6bbl
68PK21 440.6bbl
69monaco
NOT MINE 1970 Plymouth Sport Fury S23
Replies
1
Views
3K
ayilar
ayilar
S
1970 Plymouth Sport Fury GT - Seat belt's clips mounted on the top of center console
2
Replies
22
Views
4K
Welder guy
Welder guy
FURYGT
  • Locked
For Sale 1968 Plymouth Sport Fury Hardtop, 520" Stroker. $25,000
Replies
8
Views
5K
FURYGT
FURYGT
Wollfen
  • Locked
For Sale 1970 Plymouth Sport Fury S23
2
Replies
23
Views
12K
Samplingman
Samplingman
Back
Top