Recent content by MoPar~Man

Hood pins? So sad. Poor car...

https://www.forebodiesonly.com/forum/threads/oil-leak-at-intake-manifold-bolt.22158/#post-129860https://www.forebodiesonly.com/forum/threads/oil-leak-at-intake-manifold-bolt.22158/#post-129860 https://www.trifive.com/threads/oil-on-intake-bolts.119613/...

These are 15 x 6.5 so you prob. don't want them, but I'm wondering if these are suitable for C-body's / slab cars (ie if their back spacing is correct): https://www.kijiji.ca/v-tires-rims/ottawa/2001-2007-chrysler-mini-vans-2-15-inch-x-6-1-2-inch-steel-rims/1597538719

Being sold by the California Auto Museum, which I see was already thin on Chrysler vehicles. They are also selling a '37 Chrysler Airflow. They are very much not fans of any Mopar cars.

I read that copper washers have been recommended for this sort of thing.

Is that an oil passage that the bolt is threaded into? A blind hole into the crank case? Is oil leaking (being forced up) past the bolt shoulder and through a gap between the shoulder and the opposing surface of the manifold bolt-hole? Or is oil leaking from the valve cover gasket and just...

Just FYI - I sent you a PM about this.

I have to ask - what factor is working against you keeping the car? a) your age (or ability to actually drive the car) b) the ongoing cost to keep the car safe and sound AND to drive it occasionally Is passing the car down to family a possiblity? Is it more important that the car gets a good...

Lot 69: 1970 Plymouth Fury $4,300.00 Current Bid Watching:181 Total Bids: 43 Ends: 05/15/2024 at 11:33 am

Indeed, the VIN is CM23K73140242 This '67 300 is being offered as a parts car along with a '68 Polara 500 with 318. The Polara is apparently still functional but needs some stub-frame r&r from the pics I see. It has a 318, hence the 300 would act as the donor car for the engine and power...

I've stumbled across someone selling this car (or parts from this car) in Alberta. He says the car is not salvagable but has some useful pieces, like interior door cards. Anyways, here's the fender tag: My questions are - no radio code? And what is engine code 81? If there's any code...

I have this - it came out of a '67 Monaco, so it's a good bet it would the same part as any '67 Chrysler. You can keep me in mind if you can't find anything closer to you.

There was one on BAT that was bid up to $3950 in October last year, did not meet reserve. It went up again on BAT this past January, bid up to $6166 but again did not meet reserve. It has California title. See also (from 2015) this...

The puller arms should be able to reach the backside of the flange, but maybe not grab very well. If you can apply some good force using a puller, then take an ordinary propane plumbing torch to the flange and heat it up, I bet that will do it. I did the same thing for the pitman arm, I had a...

I've never been there myself, but from what I see the flange (that's what it's called in the service manual) should just slide out. Does this video help?