Search results for query: *

If that is the same car I like the cloth interior better.Also see how much nicer the wheels look without the red inserts .They should have left it alone.

Is it mounted on the bottom of the heater box with two screws and a blue and brown wire hooked to the two terminals? If so, it is the time delay relay that runs the compressor for a short time to de-fog the windows. That is all it does and really is no big deal if it don't work. It is PN 2837697...

Join me in welcoming @mmarino to FCBO.

Just checked don’t have bite going to Hershey swap meet and will keep eyes open

Its amazing the difference!

I was real happy with it to!

I think thats the same part# asSpectra but cheaper! Thanks for the heads up!

:thumbsup: DP46K2D252623 looks great. What’s the history?

Update - system was low. It held a vacuum. Recharged and working correctly, blows 40F air. Used an ultraviolet light and can detect just a minuscule amount of green on the expansion valve seam and a speck or two on the condenser. Unfortunately other substances glow green under UV light as...

Thanks for the info on the track bar bushing. The isolators are a well needed part!

It does but its a rope seal. I see guys using pipe cleaners and silicone. The original plastic pieces fit tight. It seems like the factory used contact cement and maybe this? I do watch nick and he had that leaky 383 nightmare. I want to avoid that at all costs. I think he got a new crank to...

The mileage reads 11430 so I would assume it has gone over once. The car shows very little wear so I have trouble believing it has over a 100,000 miles. On the other side I can't believe it has 11,000 miles. Lots of paper work and receipts came with the car but the mileage was never recorded...

Gas/Fuel Tank 2 Vent CR20B Mopar 1967 - 1970 C-Body Van's Auto 2-vent tank @carguy300

Sending Unit 5/16" 1967 - 1973 Mopar C-Body Vans Auto @carguy300

How about some pictures of that '59 Edsel?

I found a used regulator on eBay and ordered it....My regulator had teeth missing..

This is where the FSM comes in handy. That operation should be detailed in it, IIRC. Might be a YT video of Nick's Garage that mentions it also, as Nick is picky about B/RB rear main seals. Enjoy! CBODY67

Car looks good and was a great find. NOW, get some new whitewall tires on it before the ones on it now separate while driving! CBODY67

Thanks! My dad would have have done it on a manual machine (his handiwork is on the moon) - I don't have the patience. CNC for me.