Search results for query: *

:thumbsup: DP46K2D252623 looks great. What’s the history?

Update - system was low. It held a vacuum. Recharged and working correctly, blows 40F air. Used an ultraviolet light and can detect just a minuscule amount of green on the expansion valve seam and a speck or two on the condenser. Unfortunately other substances glow green under UV light as...

Thanks for the info on the track bar bushing. The isolators are a well needed part!

It does but its a rope seal. I see guys using pipe cleaners and silicone. The original plastic pieces fit tight. It seems like the factory used contact cement and maybe this? I do watch nick and he had that leaky 383 nightmare. I want to avoid that at all costs. I think he got a new crank to...

The mileage reads 11430 so I would assume it has gone over once. The car shows very little wear so I have trouble believing it has over a 100,000 miles. On the other side I can't believe it has 11,000 miles. Lots of paper work and receipts came with the car but the mileage was never recorded...

Gas/Fuel Tank 2 Vent CR20B Mopar 1967 - 1970 C-Body Van's Auto 2-vent tank @carguy300

Sending Unit 5/16" 1967 - 1973 Mopar C-Body Vans Auto @carguy300

How about some pictures of that '59 Edsel?

I found a used regulator on eBay and ordered it....My regulator had teeth missing..

This is where the FSM comes in handy. That operation should be detailed in it, IIRC. Might be a YT video of Nick's Garage that mentions it also, as Nick is picky about B/RB rear main seals. Enjoy! CBODY67

Car looks good and was a great find. NOW, get some new whitewall tires on it before the ones on it now separate while driving! CBODY67

Thanks! My dad would have have done it on a manual machine (his handiwork is on the moon) - I don't have the patience. CNC for me.

I am not sure if Gear Vendors makes an overdrive for the manual trans or not. On my 67 Barracuda with the 5.7 Hemi and 727 with with 355 gears I went with the Gear Vendors Overdrive unit and it is the best of both worlds. The car really moves out while not in the overdrive mode, but gets 20 MPG...

Been driving the fury to downtown LA all week 60 miles each way for work even with the heat and traffic it's been running great super happy to have it back on the road.

Cleaned up the 360 getting ready for teardown my plan is to just freshen it up as the engine runs good and start stockpiling parts for full rebuild later next year, I pulled the valve covers and it's clean inside looks like the guy who had it before me took care of it so I ordered oil pan kit...

The Mancini pulley arrived. Very nice quality and better than OEM. This pulley looks machined from a solid blank, not pressed steel.

Looking for new window regulators for a 1966 Plymouth Sport Fury (2 door HT). Any help appreciated! Cannot seem to find them online.. I see B body regulators, but not C body..

That's funny.