Search results for query: *

You get two heads for $2249.99, the $999.99 is only one piece. It´s only $250 more, not that bad.

To set the linkage, loosen the nut on the shaft where it meets the fork. Turn ignition on and set the dial on the autopilot to 9. Lengthen the two shafts apart until resistance is felt, then tighten the nut. See how that works for now.

Appreciate everyone's effort and opinions. Good stuff!

Sorry I didnt give the details. I live 50 miles from this place. Its a canadian company. its the price difference from 2018 and 2024 I am in Canada. Nothing like paying $1250 extra for a $999 part. plus tax

This is a OEM Mopar 1970's 400ci Harmonic Balancer #3614374. It fits the 400ci engine with an automatic trans, and cast crankshaft. It is in good condition. $25.00. Local pickup, or buyer pays shipping. (NOTE; This will NOT work on the 383, or 440)

Came across this and having never seen one before thought worth sharing... Says Only 300 Ever Made Only 150 Were Gold An acquired taste methinks ? https://www.bransonauction.com/vehicles/1250/1974-plymouth-satellite-sebring

These are Engine To Transmission Support Brackets. I can no longer remember for sure what these came off of, but I think it was a 1972 340. Maybe someone on here can ID them for sure. They are in good condition, just need a cleanup. $35.00. Local pickup, or buyer pays shipping.

As per title on the hunt for No.1 main cap for a 341 S25 De Soto Hemi. I've acquired a core engine that had been dismantled previously and like much it's been passed between hands etc and the No1 cap has got lost. Hopefully someone has a scrap block that might be able to provide a source for...

Thanks for all of the good advice. Brakes are all back on the car. I can rotate the front tires with some resistance, it actually seems ok. It feels like the correct amount of drag, especially with freshly turned, NOS rotors, (they were rusty, from eBay) The rusty NOS eBay rotor guy still has...

Thanks to @azblackhemi we have CM27T0C176057 -- an ER6 Scorch Red 1970 300 'vert with V1W white top and M6X9 black vinyl interior. She sports C21 buckets and buddy seats, and is for sale in Arizona. SBD was December 4, 1969 -- same as Poppy, my ER6 1970 Polara 'vert.

Forgot to mention that although "completely stock" i did swap to the open chamber heads way back in college, as my brother ran it out of water and cracked the factory closed chamber heads. It still smoked the tires for days.

If you have new rubbers for them just take a knife and cut the old rubbers around the glass. If you don't I'm sorry I can't help you. Bobby

Hi all, I’m down to the point that I need the windshield and rear window pulled from my 67 Monaco 500. I’ve been doing just about everything I can before doing this so clearly, I’m not keen on doing it myself. My glass is all in good condition and I’d like to keep it that way. So, does anyone...

OK, last one for me as OP until next year. The "statue" game. The medal round. Two nominees. I essentially put this game up - or at least referred to it back in #534, so its been out there for months. 1. Where is 1992 Pontiac Bonneville SSEi? City and state? 2. What location? (you cannot...

Transom window installed. It is beautiful! The first picture is the view from the kitchen. Second is from the sunroom where the dining table, big tv, etc is located.

I think this is the chapel, the flying buttresses look more like a roofline in the illustration. Also the tower looking element looks like the wing on the chapel in the early picture (the structures in the foreground in this picture start looking more like the illustration). Alan

Moses Sandals!!!!!! I just looked at your car! CLEAN and NICE!!! Mine is a true survivor and has some weight reduction issues in all the typical problem areas. I just tell people those holes are for drifting...(I watch a lot of VGG and TG/GT so that's where some of my humor/attempted humor...

This is out of the ‘61 owners manual.

Good tip. Tough lesson to learn.

tip of the day... When you install 4 bolts and nuts to hold the hood hinges to the car, tighten all 4 of them, not just 2.