Search results for query: *

I am still trying to factor in getting aftermarket heads for my 383. If I get angled plugs, is that gonna be an issue with hp manifolds or logs? I'd like to get the engine running and worry about headers or hp manifold later. Are angled plugs gonna be a problem? thanks

Come join the Mopar Muscle Club of San Antonio celebrate its 40th Annual Mopar Show. October 19,2024 at Biff Buzby’s Burgers, 12702 Toepperwein Rd, Live Oak, TX 78233. All MOPARS are welcome: Chrysler, DeSoto, Dodge, Imperial, Plymouth, Dodge & Ram Trucks and AMC Jeep Eagle. All proceeds go...

...wheel 20° left, note the camber. Turn the wheel 20° right, note the camber. Split the difference and thats your castor I believe. Been a while since I had done it. Its A LOT of back and forth and measuring... Edit: Caster (deg) = (180 / 3.1415) * [(camber1 - camber2) / (turnangle1 -...

This one was so easy that even I got it! No big deal though, I'll be back under the rock soon enough.

Again depends on the model. A Monaco 500 got the ignition- key, ashtray and glovebox lights. A Fury II did not. Upscale 4dr models got rear door dome lamp switches. Base models did not unless ordered.

From what I have seen in the replacement parts lists, the upper control arm bushings are, for the most part, offset. In the Chevy world, this is to compensate for "crossmember sag".

Yes, but we've seen that the factory had no apparent concerns with AC and 4-speeds in 65-68 C-bodies, it seems the musclecars were the ones prohibited? The fact that it's a 4 speed with AC and the factory built it that way despite the known concerns of such a combination is what made it...

She made a habit of flying around.

Join me in welcoming @Markchristie1978 to FCBO.

Try this guy, long time Mopar Performance dealer may have a lot of what you need. Home - Bouchillon Performance Engineering Mark

I don't know. It just looks to me that it needs a couple inches more glass and less roof from the rear view maybe? Side view, pic 5, looks good, though. Perhaps more of an arc on the top of the window?

ello; I did a search on this and found nothing, so... I had my 66 Town and Country out at the Roseville (Mich) CJDR show recently. Someone dropped a card in the car offering headliner retainer moldings for wagons with the hardboard liner. 65" length. Samples available. Headliner Molding Guy LLC...

People want most caster. So they adjust front out and rear in. But that is just a place to start, and a wishful dream. They are never adjusted like that after a proper alignment. One thing nobody mentions is that caster on each side needs to be the same or it will pull to one side. Upper...

So basically what I'm going to do is to max out the caster (or castor, how-ever it's spelled). Pull the leading side of the upper arm out, push the trailing side in, as far as they will go. Then lock it down. Then, to adjust camber, shim the lower 2 bolts of the spindle with washers to push...

Yes, I posted this one back before Brad (I guess) bought it. Posted a bunch of the ebay pics, a broker was selling it. And it got discussed maybe 2-3 weeks ago, also.

At to measuring devices, the local dealer had an adjustable bubble level that attached to the spindle. Had to remove the grease cap so it could clamp on. Which aggravated the car having Magnum500 wheels on it! With the wheels on the wheel plates (allowing the wheels to turn side to side...

In his original post, he says he has pistons, and his motor is being made ready. He was asking about cam selection. He wants something that will work in his car to give a little more pep.