Search results for query: *

Not very big, but interesting. The Old Chrysler Garage | Isanti MN

I installed a aftermarket add on transmission cooler with the lame supplied little fabric in it X pattern type gas line hose, it blew out (split) at over 100+ mph and sprayed ATF all over my windshield at that speed. Use good hose as I suspect at high speeds the pressure can get very high. I...

.

Yes that is working fine

Did you check the brake light switch? That turns on/off the power.

I've seen that 2-piece driveshaft mentioned in Chrysler sales literature so it's definitely a factory item.

A trick I learned from Hot Rod magazine years ago was to use two clamps but to put the screws on the clamps 180 degrees apart on the hose for more even clamping pressure. May or may not be true, but I did it on an aftermarket trans cooler with rubber lines that I installed on my 1969 Pontiac...

Welcome @bloks039 — do you have photos of the interior? @Rustyrodknocker is in Oregon too

Join me in welcoming @randrtime to FCBO.

BUMP

my dad had a 62 Ford wagon...390 3 on the tree...back then a lot of folks just didn't trust an automatic for towing

BUMP

BUMP

I used hose for a while, and didn't flare the metal lines, but did use 2 clamps a couple of inches apart.

Here are two of my "beauties"... The motor painting I referred to in the comments above is the 383 Satellite. I'll be doing the Chrysler next! Cleaned the motor with Purple Power then Eastwood 2-part primer and Hirsch paint ...came out well! BK

I used very short pieces of very small rubber tubing (probably vacuum line?) to replace some nuts that wouldn't tighten down.

Thanks Pete… I gonna quest the holy grail at every junkyard. I have an imperial 1970 white seat including an white hinge cover. I don’t need it and put it up for sale including some other small imperial 1970 parts in the pictures … nobody is interested in it so far……so if I can make somebody...

Thanks Pete for the explanation. My chairs are now at the upholstery. I got the original green color leather and vinyl from SMS fabric and one surplus store in Milwaukee. They said the same as you mentioned. They are saving the eagle stamp in the leather at the top of the chair in the new...

Very true. But worse, parts in the US for the Gremlin are few and far between - I am talking about interior bits, a real nightmare to find anything in decent shape, NOS is very hard to come by, much harder than for a fuselage c-body. I guess most of these Gremlins went to the scrap yard, and...

No. Click link below. Gary's grill has a single electric motor with a long rod to operate both headlight doors SOLD - 1969 Chrysler 300 grille assy complete