Search results for query: *

The guy is most likely a spammer. Don't engage.

Hello and welcome to FCBO. When you say that you've searched for hours about this issue - are you refering to the issue of people altering their wiring because of the belief that the ammeter is a potential problem, or the issue that the legitimacy of this wiring modification is being called...

From the 70 manual. 1/8” difference between A and B. Tightening the torsion bars raises the height. Loosening the torsion bars lower it. Make sure you spray the adjustment bolts with penetrating oil and take pressure off the torsion bars by jacking up the frame before turning. Screen shots of...

Not so bad. It’s broken down into pieces. Attack each one separately and then be patient with checking the linkages. My bet is that the linkage hasn’t been disturbed and some of the components have been removed or don’t work.

Spammer!!! @Joeychgo

Ponca, Nebraska - still open and fabulous!

BUMP

BUMP

Remove the the door lock tumbler from door, it is awkward but can be done. Then take the tumbler to lock smith to have key cut. Have you looked all over the car for a hidden key? Small magnetic box behind bumpers, fenders etc. I have found key boxes while working on cars I have owned many years...

Good morning gents , just purchased a 72 Newyorker and a 73 fury . I had to grab them before some non C-body person got to them , They have been sitting for 25 years and of course no keys! My question is is that i have the original dealer invoices for these cars .The new yorker has the key codes...

Join me in welcoming @donhake to FCBO.

We're

Thanx alot that is very useful pics in here. Im pritty sure i can add something like that to my build. Thanx for that.. Cool wagon aswel btw.

Yes, the green one. My 1969 has autotemp, your car mabye have the manual ac. Look in the shop manual, all the vacuum hoses and colors are pictured there

I did put one of the $70 eBay 318 carbs on a 360. I slotted the carb base mounting holes to fit the bigger spread 360 manifold and used the thickest 360 base gasket I could find. This was done because the engine in question in the car in question was a big question from jump, as was the whole...

I should have all of that, if you're in a hurry I probably can't help as I'm in the middle of moving and can't readily access it. Nick

I had the same when I gott my -62 Newport & as you can see on my profile pic I just rinsed i & kept the top chrome bit "naked" & liked it like that. I had an idea to put on some clear plastic hose but I thought that in my opinion it might not be as good.

I've had good success with the spring shocks. The 4 pair I remember on big sedans raised the rear at the wheel about one inch. On the Darts and Satellites, it was about 2 inches. More if the springs were weak, less if they were not. I didn't notice any draw backs. I put four on my long...

Hi,I hate to ask but hours of searching and haven't read about this issue. I did the under the hood ammeter bypass.10g with 14 g jumper wire. Hooked the battery back up,started it,and then the ammeter maxed out.shut off car,disconnected battery,still pegged full. Installed a volt meter,12.5 off...

I just thought of another place it could go. Clutch Pedal Alan