Search results for query: *

Yep. Done that and thanks.

Both wheels off the ground. Following service manual. No, I was half inch out when the lock broke and the adjuster turned itself back off. I have .018 after adjusting out almost all the way.

What's the purpose of the adjuster? Why isn't right Axle set up same as left?

Yes. Done before. Axle was super sloppy, didn't measure, and noisy. Got timkens pressed on both axles. Set right Axle at .018. spun it in air. Ok. Took a 20 mile ride and axle seal was leaking. Took wheel off and end play was at least 1/2". Adjuster lock was bent out and adjuster...

My car is a nobody haha. Just was interested because a lot of Ford's at a car show had a place to get that information.

I'll get a picture

I couldn't get proper clearance until the adjuster was almost all the way out. Your inner tangs are on the inside and mine were on the outside. I took a heavy punch and bent them back in and now seems to work but adjuster is way out. At least over a 1/4 inch. I rechecked bearings and they...

Is there somewhere that list yearly statistics. For example how many gold cars, how many convertibles, how many ac? Etc?

I don't understand the green bearings. If they eliminate the right adjuster, why is an adjuster needed anyway and why can't I use a left axle flange and just eliminate the adjuster anyway?

Does anyone know where to get a right Axle end play adjuster? My axle was making noise and I changed all the bearings. I adjusted the right axle and the adjuster out almost all the way. Put the lock on it and 50 miles later the lock was bent and the adjuster had turned itself off. It appears the...

Does anyone know where to get a right Axle end play adjuster? My axle was making noise and I changed all the bearings. I adjusted the right axle and the adjuster out almost all the way. Put the lock on it and 50 miles later the lock was bent and the adjuster had turned itself off. It appears...

Another related question. Does the axle adjustment on the right have anything to do with the left? Think I'll recheck the right when I'm done.

Thanks

Wow. I just found a whole repair kit on eBay for $10. Axle flange, gaskets and seals.

Better picture of front and back

I'll get a picture soon as I get back out there. Another oddity is only one edge is eaten up. It's not longer flush to the axle. The opposite edge is fine.

My 69 300axle flange is ground down on the axle side. Bearing went bad and I had at least 1.5" end play. How important is this flange in maintaining end play. This is the left, non adjustable side. Should I start looking for a replacement?

I have the K, but someone before me changed the cam, carb to a Carter, and dual exhaust. I guess they sold it cause 4400 lbs doesn't make a good race car hahah.

I have the K, but someone before me changed the cam, carb to a Carter, and dual exhaust. I guess they sold it cause 4400 lbs doesn't make a good race car hahah.

Very nice. I have a 69 300 very in gold. Been renovating for 3 years. Finally on the road.