Search results for query: *

3.75 - 3.92 ?

There is a The 360 LA is probably not hard to come by. I purchased a good 360 four barrel for $300 a few months ago. I think it's from a 1980 Plymouth Volare cop car. Didn't want it, somebody needed a little money, so. Anyway, looking for a 70s Dart/Valiant to put it in. Because of fond 69 GTS...

Hi Missouri Your amperage output is higher than stock. You have a 60 amp alternator, so at speed the alternator is going to output more amps than stock 30 amp or 35 amp alternators. Your voltage regulator is regulating voltage, which is the electrical force pushing those amps. That is not the...

*It could mean that the ammeter is bad. *BUT: Firewall connectors for power output from alternator commonly go bad on their own. I would drill a hole in the firewall, use a rubber grommet in the hole, then run alternator output wire thru the grommet. That way you bypass the firewall connector...

You should be able to use the later single diaphragm from a Fusey if you have a console shift. Because it's bigger in diameter, it's a no go on column shift cars because it interferes with the shift linkage. Should be easier to find too. Kevin

What does clean them the best cleaner or home remedies for cleaning

Cool!

Empty!!!!

Understood I will look into what I can get out of the poly more in depth while I search for a 360 la, so I can see which route I'll take but Im thinking about doing a stroked 360 and just holding on to the 383 I have till a later date or a different project but time will.

Explained in the Poly318 link @Big_John supplied above. There were "Marine" versions with an "M" cast into the cyl heads or whatever. CBODY67

If you have 4 wheel drums, put on the wilwood disc's all the way around. I can send pics of mine and give tips if interested.

Prior Brake Products. 972-388-1090. They do have a website.

For Sale: 1966 Dodge Monaco 4dr Hardtop - $9,575 - Athens, OH 1966 Dodge Monaco for sale by owner - Shade, OH - craigslist Seller's Description: This 1996 Dodge Monico Runs and drives, good tires, LOOK at pictures, if interested. Contact: Roger Schoolcraft (220) Two-2-7-1-eighty-4 Chat available...

Ok Yea but how would I know they are even adaptable to my 318 poly

How about a name and contact info.

Looking for the diameter of the hub hole of my 65 Imperial wheel; anyone out there have that info readily available?? Thank you if you can assist!

A young guy I work with cast metal for a hobby. If you do succeed to print one I would be willing to see if he would try to make one of aluminum.

If it has a motor, any good electrical shop can usually redo them to work again.