Search results for query: *

Good Morning all. My inexperience leads me to a question. I am in the middle of having 440 built for my 71. .060 over , stealth heads with bowl work ( still to be completed), 1.5 harland sharp , Icon 9953 pistons should put me right around 10.5 ish . Kinda loosely based off the LOWLY 440...

My small block was built last yr with solid lifters. I just checked out the lash for the 1st time and noticed when bumping the motor over alot more oiling on passenger side as opposed to the driver side. If I remember correctly it's a Melling HV pump in a Milodon 7qt pan. Should I be...

Good morning all. I found a 46rh with a 3k convertor to put in my 71Fury. Got it for a song and a dance. I'm relatively close to starting it but the case connector is different both 3 pins the 727 has longer pins. Can I safely do a swaparoo with hurting the RH. I haven't put the PATC OD kit on...

This winter I would like to do a rear gear swap and OD tranny. My 727 leaks like the titanic and it needs steeper gears (currently 2.71) . I would like to do 3.90 or 4.11 with the OD swap. I haven't found any rh42 or 46 around on Craigslist or Junkyards but plenty of GM200r4 and 700r4 (and...

Good morning all, just curious how long you should run a plug before you try and get some information on whether it's burning lean or hot fouling Etc. I see some people say they take it for a 2-mile ride up the road pull the plugs and make adjustments. Is that enough time? Should it be 50 miles...

I want to put some higher gears in my 8.25 . It's a 71 Fury warmed over 360. It currently has 2.??? Something gears . Desert gears . I would like to do the overdrive thing but that's another topic. Is there any carrier change with the gear change or will the carrier I have accept the sure...

Had a reputable shop put together a 360 for me ( I was impatient). They talked me out of the roller cam . I have heard nothing but horror stories from people putting in flat tappet cams and wiping them out. Now I'm a statistic. They assembled intake to pan , installed the distributor and...

Can anyone share some underhood pics of their 360 with AC ? Specifically the bracket placement for accesories. I'm putting back together a 71 Gran Coupe that I received in boxes . It's a pain to sort out without a starting point to go off of. I'm going off of bad internet pics and witness...

I was impatient and had a shop build my engine. Hopefully to accept delivery this Thursday ( fingers crossed). He sent me a pic of the assembled engine and I'm curious about so much intake gasket showing. It's a reputable shop , should I worry or ask anything before I pick it up?. Its a...