1965 New Yorker 413 oil pan

[mopar440]

Apparently, I have the wrong oil pan on my car, the idler is hitting it apparently, I need part #
2268459 but these have no markings, any way to identify them? Thanks

 

[Ross Wooldridge]

Later model pans that fit are stamped 187, so look for a pan with that on it.

 

[patrick66]

Oil Pans

They do have a three-digit marking stamped into them. 699 or 187 will work for you. These pans are identical, save for the number stamping.

 

[mopar440]

Great,I'll keep a look out, according to online and a book here at mopars in the park, the
2268459 pan has no markings, buy if they will work, great

 

[Xenon]

Before you look at getting another oil pan look to see if your motor mounts have not crushed with age.....

 

[mopar440]

Mounts good, I think someone installed a truck 413, it had a industrial thermostat in it. They made motor mounts, they look good this is pass side maybe a smack with a hammer will work lol

 

[CBODY67]

I suspect that an Industrial-spec engine would not need steering linkage clearance in the oil pan. FWIW

Careful with a hammer so that you don't crimp or put a hole in the pan.

Just some thoughts,
CBODY67

 

[mopar440]

Just picked up a 699, $20!

 

[mopar440]

I should be able to reuse my pickup, correct? Can i do it with eng in the car? Maybe dropping drag link?

 

[CBODY67]

Check the FSM. Might need to rotate the crank some to get the counterweights out of the way?

CBODY67

 

[mopar440]

I still haven't done this yet, hope it's easy!