For Sale 1965 sport fury console car- whole or parting out

[Valiantmope1]

Yes they will bolt right to your spindle and ball joint if you have 11" brakes. Mine is a 65 sport fury so same to same here. You might want to play it safe and purchase a fresh set of rubber lines, although i will probably throw mine in if decent. Wheel cylinder is still fresh as i mentioned before- so its truly plug and play.

If you are recerring to that little rubber tit thing that fills the gap up so to say then yes but they are firmly attached to the vent frame. I pulled the side glass out and thought i could simply remove it but the screw was like it was welded in place so they stayed. My buddy may have even ripped the other one off in anger too. Ill check right now and see- i do have the complete vent window assembly pair i could let go cheap if so since i have technically two sets. They may even reproduce those too. More to follow.

 

[vortdoggie]

If vent window regulators are in pretty good working condition would love to have those thrown in along with the chrome washer and screw on upper passenger vent window hinge. And the rubber piece I was talking about if you can get passenger side off great even If it's torn off but useable.

 

[Valiantmope1]

ok I have both regulators ready, and I have the chrome washer and screw.

The vent window frames are whole and if you pay the shipping you can have the pair of them cheap. I'd like not to have to remove that rubber piece and strip out the screw trying to remove it. I found the piece for the drivers side- a little contact cement will fix it. Plus the chrome and rubber are real nice on these. so if yours have any pitts or rust, these would be a nice upgrade. Slip your glass in them, give em a scrub (dusty) and go.

I have the hub and drum setup off of the passenger side- ran out of daylight this weekend for the driver's side. everything looks great except for the hub grease seal- apparently I didn't replace those and they look original- OK but better safe than sorry.. Part #8121S at autozone and they get 5 bucks for each. Drum is perfect.

ill go $50 for the pair of vent window frames with rubber tips (the chrome hinge and washers etc come with the frames if you buy them), $35 for the pair of vent window regulators , and $40 each for the drum/hub setup as mentioned before. so $165 total before shipping.

Remember you need to use your spindles and ball joints, but I will include the hardware so it bolts right up. If you should want the spindles and my ball joints I can include for extra but let me know first.

It will all ship out as soon as we agree on what you want and you send a Paypal payment. Let me know when you get a chance. I will PM you my email address for the Paypal payment.

 

[Valiantmope1]

pm sent

 

[BeatersRus]

normally,i dont do this but,id just like to say,this guy is the Real Deal.
he helped me out with my car and at a more than reasonable pricing as well.
hes an asset to this community.
Cheers

 

[Valiantmope1]

Thanks dude! Glad i could help. If ya need anything else, just holler.

 

[Sportfurysteph]

Hi do you have any extra sets of taillight lenses for driver side assembly? Also transmission mount???? Thank you

 

[Valiantmope1]

I might have a driver quality lens only set- not beautiful but not cracked either. No backup lenses at all and yes I have a used tranny mount in the car now. You need just the biscuit or the whole member?

 

[Sportfurysteph]

I might have a driver quality lens only set- not beautiful but not cracked either. No backup lenses at all and yes I have a used tranny mount in the car now. You need just the biscuit or the whole member?

That's ok my car is a driver not a show car or resto .as long as they aren't broken like mine .I'll have to source a reverse lens then ...can you send me a picture of the mount ?I need only the biscuit . All the ones I've tried after market are completely wrong .

 

[Valiantmope1]

Ok let me see what i have. As far as the mount is concerned, if you want new,

www.imperialservices.net

has the correct one but be sitting down when you see the price. Mine is still in the car and is definitely used but appears to be solid. My price is better for sure. I will try to get a photo this evening.

 

[Sportfurysteph]

Ok let me see what i have. As far as the mount is concerned, if you want new,

www.imperialservices.net

has the correct one but be sitting down when you see the price. Mine is still in the car and is definitely used but appears to be solid. My price is better for sure. I will try to get a photo this evening.

Perfect !!
yea I seen that price thought they forgot a decimal point or something sheesh ..

I'll check back in later this evening Thank you .

 

[BigFury]

How's the front bumper look?

 

[Sportfurysteph]

Were you able to check on that trans mount?
Thanks Stephon

 

[Valiantmope1]

I tried but with father's day and our horrible heat wave (105F on sunday at the house) got only so far as to look it over a little more. I apologize for the delay. I will try this week and you are first dibbs if you want it. I got the lenses out i need to compare part numbers to make sure i got the correct ones. More to follow soon.

 

[Sportfurysteph]

Were you able to check

I tried but with father's day and our horrible heat wave (105F on sunday at the house) got only so far as to look it over a little more. I apologize for the delay. I will try this week and you are first dibbs if you want it. I got the lenses out i need to compare part numbers to make sure i got the correct ones. More to follow soon.

No worries thank you I understand having a heatwave here as well ridiculous ... look forward to hearing from you soon .. thanks again

 

[Valiantmope1]

So as you can see, the mount is present but not removed at the moment. Appears complete and solid.

Lenses: You did say drivers side right? Cause i have 4 really nice to so-so quality units for the right hand passenger side. Sorry.

 

[BeatersRus]

lol...so yeah...about that front bumper...thats gonna cost large to ship..
did you ever sell it because as it turns out every fury has a bent or missing front bumper anywheres local to me....

 

[Valiantmope1]

I got a guy looking into it buying it now. He made an offer but he is like you- way far away so shipping is terrible.

 

[BeatersRus]

ikr we are stuck here in the rustbucketbelt,
and hey ty for letting me know too.
and also,ty again for the other parts,
it made my day to finally have the car complete trimwise.

 

[Valiantmope1]

Glad to help. Wish i could get mine finished speaking of rust. Youd think the desert here would help there but i got the same ol trunk and extension woes as you rustbeltbucket folks.
Not to say it will but if that bumper deal doesnt happen you are next on the list.