1966 CHRYSLER 300 2 DOOR IDAHO $2800 OBO run and drives.

Status
Not open for further replies.

RUMBLON

New Member
Joined
Jan 3, 2014
Messages
5
Reaction score
0
Feedback: 0 / 0 / 0
Contact seller
1966 CHRYSLER 300 2 DOOR IDAHO $2300 OBO run and drives PRICE REDUCED.

Run and drives but the bumpers and chrome are off as I started a restoration then moved. 383 auto. runs and drives. All trim is off and bumpers.

Car is north of Boise in Midvale Idaho.

I have additional pics and will consider $1000 cash and some sort of trade or maybe a trade straight across for a jeep cherokee AUTO with 6.0 OR other DODGE PLYMOUTH vehicle or extra cab truck.

OK, after realizing that I CAN NOT find the new tail light at this point and the fact that I need this car sold I am reducing the price again to $2300.00 Car is solid, its does come with the nicer bumper. I recently moved and made 13 trips between numerous vehicle 500 miles over time and may have simply left the other tail light. SO $2300 IT IS IF ANYONE IS INTERESTED.


Dave

- - - Updated - - -

NOTE; Door panels are also off and I started using a non stock fabric to cover them with. Most chrome is there and usable. will consider ALL OFFERS. OR TRADES. ALSO LOOKING FOR CLASS 1 3 POINT TRACTOR IMPLEMENTS.

48856473[1].jpg


CRAIGSLIST1.jpg


IMG_0800.jpg


photo_4[1].JPG


photo_5[1].JPG
 
Last edited:
Welcome to the site from the Motor City! love those '66 300s, best of luck selling it.
 
What is the switch to the left of the column on the dash used for? I can't quite read the bezel. That's the top switch on convertible models. I don't think I've ever seen it on a hardtop.
 
I am no longer a C Body owner. That being said, I did own a 66 Chrysler 300 very similar to this one. I purchased my B Body, 66 Ply Satellite from the seller of this car so I am very familiar with it and the person himself. This is a great buy for someone wanting what is probably the best year of the 300 IMHO. It is a Western Car and is in damn good shape. I would indorse for anyone interested that this is well worth the effort. Some TLC and a little fluff and buff and you have a great cruiser. Dave is a stand up guy and is a true MOPAR nut. I just don't have the room otherwise I would be all over this one. Here is a pic of the one I had. Hope this will help Dave....cr8crshr/Bill:eek:s_dancing2:IMGP0002.jpg

IMGP0002.jpg
 
What color is this car?
 
Hi, to answer a few questions:

color is a pretty rare one year only I am told LILAC POLY. Faded but you really see the color in the jams and trunk.

Tail light- I purchased a nicer replacement and its included.

Front bumper- I also have a front bumper that I purchased that in nice shape.

Runs and drives nice, needs drum brakes adjusted.

I purchased this car as a project for my daughter while living in Nevada. I had 4200 sq ft in shop and a paint booth. I removed all the chrome that was on it, mostly all there may have been one piece missing. Started a resto by removing the majority of the dent in the pass side door.

Then I decided to retire and move to Idaho where I no longer have the shop to restore it at this time. And my daughter needed a vehicle for school.

Car is a nice solid builder, no more, no less. If anyone is interested Its located in Midvale Idaho, north of Boise. I can get more pics of what ever you would like to see.

here is a link to some additional pics and pics of the same color combo. LILAC POLY with white interior and top.

the bumpers and chrome and door panels have been removed at this time.

http://s695.photobucket.com/user/SVMOPARS/library/1966 CHRYSLER 300 HT?sort=3&postlogin=true&page=1
 
OK, after realizing that I CAN NOT find the new tail light at this point and the fact that I need this car sold I am reducing the price again to $2300.00 Car is solid, its does come with the nicer bumper. I recently moved and made 13 trips between numerous vehicle 500 miles over time and may have simply left the other tail light. SO $2300 IT IS IF ANYONE IS INTERESTED.
 
Did you end up selling this 300?

I remember when you got it for your daughter on MoParts.
 
Status
Not open for further replies.
Back
Top