For Sale 1969 Chrysler 300 convertible for parts

[Wollfen]

hey boss

trunk floor, frame rails underneath and rear seat floor .. still around? if so, what do you need for them?

sorry to bug you if they are gone. tried to PM you but your inbox is full

thanks!

Rear seat floor is good, as are the rear frame rails, the trunk floor is a bit thin though. MY biggest concern would be how to ship it, the last trunk floor I sold the guy did a 10 hr drive to pick it up and it took four of us to load it in one piece.

 

[Wollfen]

Yep that will do it, along with the Dutch panel and trunk gutter you showed previously.

View attachment 383263

I got the piece out today, it is solid and looks good. I will PM you with a price.

 

[amazinblue82]

Rear seat floor is good, as are the rear frame rails, the trunk floor is a bit thin though. MY biggest concern would be how to ship it, the last trunk floor I sold the guy did a 10 hr drive to pick it up and it took four of us to load it in one piece.

I would send my guys from SC to pick up.

alternatively, and if you wanted to sell, if whatever is left can roll (after you make good on stuff people already have purchased/spoken for, i would buy that and get it transported?

 

[Wollfen]

I would send my guys from SC to pick up.

alternatively, and if you wanted to sell, if whatever is left can roll (after you make good on stuff people already have purchased/spoken for, i would buy that and get it transported?

That can be done, wont take me much to put a pair of spindles on the front of the car. I dont have tires that will stay inflated though, can you bring wheels? Check the pics, this is how the car looks now, the rear axle housing has no hogshead, it was missing when i got the car.
I will PM you with a price, oh the front windshield frame and top of the cowl in this car is mint too.

 

[amazinblue82]

PM's sent chief. thanks

 

[T/A 392]

Right front spindle still available??

 

[Wollfen]

Right front spindle still available??

Disk brake assy was sold off awhile ago. sorry.

 

[Derek Myers]

Disk brake assy was sold off awhile ago. sorry.

That can be done, wont take me much to put a pair of spindles on the front of the car. I dont have tires that will stay inflated though, can you bring wheels? Check the pics, this is how the car looks now, the rear axle housing has no hogshead, it was missing when i got the car.
I will PM you with a price, oh the front windshield frame and top of the cowl in this car is mint too.


View attachment 384298 View attachment 384299 View attachment 384300 View attachment 384301

is this trim piece in good condition? I would be interested in both sides if you have them in white

 

[Wollfen]

is this trim piece in good condition? I would be interested in both sides if you have them in white

View attachment 384621

I do have them yes, but they are a bit powdery, I doubt they are much good?

 

[Wollfen]

@Samplingman Here is a pic of the packaged dutchman panel.

 

[Samplingman]

@Wollfen, perhaps you can make two additional cuts to make it easier for shipping. I still need all the parts and I can easily sew it back together. Come to think of it, you wouldn’t have to even cut all the way through, just enough to fold those “wings” in.

 

[Wollfen]

@Wollfen, perhaps you can make two additional cuts to make it easier for shipping. I still need all the parts and I can easily sew it back together. Come to think of it, you wouldn’t have to even cut all the way through, just enough to fold those “wings” in.

View attachment 385101

I will get onto it, cheers.

 

[Derek Myers]

I do have them yes, but they are a bit powdery, I doubt they are much good?

thanks

 

[Wollfen]

@Wollfen, perhaps you can make two additional cuts to make it easier for shipping. I still need all the parts and I can easily sew it back together. Come to think of it, you wouldn’t have to even cut all the way through, just enough to fold those “wings” in.

View attachment 385101

I'm thinking it might be best to cut all the way through, this steel is a lot thicker than the sheet metal panel. By bending it, it will surely distort the metal itself and be difficult to bend back out, easier to run a weld though.

 

[Samplingman]

I'm thinking it might be best to cut all the way through, this steel is a lot thicker than the sheet metal panel. By bending it, it will surely distort the metal itself and be difficult to bend back out, easier to run a weld though.

Ok, cut on the red marks I made on the photo and that should do it.

 

[Scott 440 TNT]

Hello
Do you have the gas tank and filler neck.
If they are still solid I would be interested.

 

[Wollfen]

Hello
Do you have the gas tank and filler neck.
If they are still solid I would be interested.

Car is gone, check with @C Body Bob

 

[69polara440]

Power brake booster available? or was it sold with the disc brake assembly? Thanks!

 

[Wollfen]

Power brake booster available? or was it sold with the disc brake assembly? Thanks!

Its gone too

 

[Flemming Navntoft]

do you have the lock handle for the top that lock the top to the window frame driver side. need a complete handle with all parts