SOLD 1973 Chrysler New Yorker

Status
Not open for further replies.

Black440

New Member
Joined
Dec 8, 2014
Messages
7
Reaction score
17
Location
Michigan
Feedback: 0 / 0 / 0
Contact seller
Selling my 73 Chrysler New Yorker, 440 car. Clean title in my name located in Detroit, MI. Have not tried to start in a while but will run with some work. I ended up buying another NYer I like better is why I'm selling this one. Body is in decent shape, no bubbles under vinyl top. Has some rust in the very lower rear quarter on the driver side and light rust in the passenger floorboard where the heater core leaked. That is not rust under the rear window, the vinyl just peeled away. Car is still in good shape overall for its age. Asking $2000

20240421_164811.jpg


20240421_164817.jpg


20240421_164811.jpg


20240421_164743.jpg


20240421_164759.jpg


20240421_164751.jpg


20240421_164828.jpg


20240421_164840.jpg


20240614_190705.jpg


20240614_190712.jpg
 
Last edited:
Thank you for posting. Do you have the fender tag listing the options? Photos of the engine bay, driver's door panel and door jamb, and trunk would be helpful.

The interior looks to be in great condition, can you show the dash, dashpad, driver's door panel, and the carpet where the A/C leaked?
 
Thank you for posting. Do you have the fender tag listing the options? Photos of the engine bay, driver's door panel and door jamb, and trunk would be helpful.

The interior looks to be in great condition, can you show the dash, dashpad, driver's door panel, and the carpet where the A/C leaked?
I will post more pics to this I didn't have my keys when I took the pics, will get some later today or some time this weekend.
 
Thank you for posting. Do you have the fender tag listing the options? Photos of the engine bay, driver's door panel and door jamb, and trunk would be helpful.

The interior looks to be in great condition, can you show the dash, dashpad, driver's door panel, and the carpet where the A/C leaked?

20240614_191456.jpg


20240614_192303.jpg
 
Do I see AutoTemp controls? The fender tag should show if it has the H53 option code. Thank you in advance.

PS: @73Coupe and @SPS, I am also with JY3. The fender tag will tell.
 
Thank you @Black440 for posting the tag of CS43T3C190880. H53 indeed. I will post the tag and link your ad in The 1973 Chrysler Thread, to make sure that folks who are especially interested in 1973 Chryslers see your car.

PS: The rim blow wheel seems to be intact. If the horn works, that right there should be worth quite a bit to the right buyer. Ditto for the washer bottle, if it is intact.

PPS: You mentioned in the OP that the engine will work "with some work", what would it need? Can you please post pics of the engine bay and tell us how you know that it will run? Does it turn freely and, when you last started it, did it sound OK? Does in run on a bottle? What is the gas tank/fuel system situation?
 
Last edited:
Thank you @Black440 for posting the tag of CS43T3C190880. H53 indeed. I will post the tag and link your ad in The 1973 Chrysler Thread, to make sure that folks who are especially interested in 1973 Chryslers see your car.

PS: The rim blow wheel seems to be intact. If the horn works, that right there should be worth quite a bit to the right buyer. Ditto for the washer bottle, if it is intact.

PPS: You mentioned in the OP that the engine will work "with some work", what would it need? Can you please post pics of the engine bay and tell us how you know that it will run? Does it turn freely and, when you last started it, did it sound OK? Does in run on a bottle? What is the gas tank/fuel system situation?
It has been sitting for about 2 years. Fuel system will need to be gone through to be on the safe side but will turn over with gas in the carb. This is a project and the price reflects that. It's a decent C body for $2k or reasonable offer. Pictures of engine bay has been posted already..any other serious interested parties are more than welcome to message me at this point.
 
Status
Not open for further replies.
Back
Top