SOLD 1973 Chrysler New Yorker

[Black440]

Selling my 73 Chrysler New Yorker, 440 car. Clean title in my name located in Detroit, MI. Have not tried to start in a while but will run with some work. I ended up buying another NYer I like better is why I'm selling this one. Body is in decent shape, no bubbles under vinyl top. Has some rust in the very lower rear quarter on the driver side and light rust in the passenger floorboard where the heater core leaked. That is not rust under the rear window, the vinyl just peeled away. Car is still in good shape overall for its age. Asking $2000

 

[ayilar]

Thank you for posting. Do you have the fender tag listing the options? Photos of the engine bay, driver's door panel and door jamb, and trunk would be helpful.

The interior looks to be in great condition, can you show the dash, dashpad, driver's door panel, and the carpet where the A/C leaked?

 

[73Coupe]

Can't tell if that's DY2 Sunfire Yellow or Y3 Light Gold...? Leaning towards Y2.

 

[Black440]

Thank you for posting. Do you have the fender tag listing the options? Photos of the engine bay, driver's door panel and door jamb, and trunk would be helpful.

The interior looks to be in great condition, can you show the dash, dashpad, driver's door panel, and the carpet where the A/C leaked?

I will post more pics to this I didn't have my keys when I took the pics, will get some later today or some time this weekend.

 

[SPS]

Can't tell if that's DY2 Sunfire Yellow or Y3 Light Gold...? Leaning towards Y2.

My guess is, it’s JY3

 

[Black440]

Thank you for posting. Do you have the fender tag listing the options? Photos of the engine bay, driver's door panel and door jamb, and trunk would be helpful.

The interior looks to be in great condition, can you show the dash, dashpad, driver's door panel, and the carpet where the A/C leaked?

 

[ayilar]

Do I see AutoTemp controls? The fender tag should show if it has the H53 option code. Thank you in advance.

PS: @73Coupe and @SPS, I am also with JY3. The fender tag will tell.

 

[Black440]

Do I see AutoTemp controls? The fender tag should show if it has the H53 option code. Thank you in advance.

PS: @73Coupe and @SPS, I am also with JY3. The fender tag will tell.

The fender tag was uploaded.

 

[chrysler_fan]

Can't tell if that's DY2 Sunfire Yellow or Y3 Light Gold...? Leaning towards Y2.

View attachment 666006

The posted fender tag shows it is light gold. It is too gold something to be sunfire yellow.

 

[ayilar]

Thank you @Black440 for posting the tag of CS43T3C190880. H53 indeed. I will post the tag and link your ad in The 1973 Chrysler Thread, to make sure that folks who are especially interested in 1973 Chryslers see your car.

PS: The rim blow wheel seems to be intact. If the horn works, that right there should be worth quite a bit to the right buyer. Ditto for the washer bottle, if it is intact.

PPS: You mentioned in the OP that the engine will work "with some work", what would it need? Can you please post pics of the engine bay and tell us how you know that it will run? Does it turn freely and, when you last started it, did it sound OK? Does in run on a bottle? What is the gas tank/fuel system situation?

 

[Black440]

Thank you @Black440 for posting the tag of CS43T3C190880. H53 indeed. I will post the tag and link your ad in The 1973 Chrysler Thread, to make sure that folks who are especially interested in 1973 Chryslers see your car.

PS: The rim blow wheel seems to be intact. If the horn works, that right there should be worth quite a bit to the right buyer. Ditto for the washer bottle, if it is intact.

PPS: You mentioned in the OP that the engine will work "with some work", what would it need? Can you please post pics of the engine bay and tell us how you know that it will run? Does it turn freely and, when you last started it, did it sound OK? Does in run on a bottle? What is the gas tank/fuel system situation?

It has been sitting for about 2 years. Fuel system will need to be gone through to be on the safe side but will turn over with gas in the carb. This is a project and the price reflects that. It's a decent C body for $2k or reasonable offer. Pictures of engine bay has been posted already..any other serious interested parties are more than welcome to message me at this point.