440 source bushed stainless Rocker Arms.

[Frank Odenthal]

I‘m interested in the new 440source bushed stainless Rocker arms when rebuilding my engine with 440 source heads.
Has anyone made first experience or high milage on them ?
Thank you,
Frank.

 

[RemCharger]

Pushrod length setting is critical on these

 

[Frank Odenthal]

Pushrod length setting is critical on these

You mean determining the correct pushrod length ?

 

[RemCharger]

You mean determining the correct pushrod length ?

Yes

 

[wyrmrider]

do theyhave the cup on the pushrod or the adjuster?
bettr if cup is on the adjuster
then use ball and ball pushrods with oil thru the pushrods and Magnum/ AMC lifters
correct on pushrod length coment above
you might think of a rocker shaft relocation kit to get mid length geometry
the adjuster and pushrod should line up at mid lift as well as narrow swipe on valve tip
It would be nice to get ford size for upper pushrod ends and cups
chrysler size is a high wear area if splash oiled

 

[Frank Odenthal]

On this Rockers, the cup is on the adjuster. Ball- Ball Style pushrods are needed. Pressurerized oiling to the pushrod Ball Comes thrue the rocker.

Bushed Stainless Adjustable Rocker Arm System - 1.5 Ratio