Contact seller
Been a while since I have been on here and life has changed a lot in a short time for me. My priorities have changed and I have decided to sale my 69 300 vert. Overall I would consider it a rough project. It may be better suited for parts for someone. But here is what I have.
69 300 L code rolling body. Has clean Indiana title in my name. I have the fender tag as well.
Has 8 3/4 housing and axles ( I will be removing the 3:23 SG for my use). It has disc brakes on the front. I have the hood and all the other body parts are on car. There is no interior for the car except for the dash. It has a top frame but no top. All hydraulics are there and original. I also have the driveshaft for the car. The body is the best part about it. It has a little rust in the lower quarters behind the rear wheels, couple holes in the drivers side floor pans, some in the windshield frame (I have repaired some of this), and needs a trunk floor.
I have a 4 speed factory floor hump, pedals, z bar, Zbar frame bracket, clutch rod that goes thru the firewall. The pedals are currently hanging in the car. All this was from a 67 Cbody but from mock up it looks like it would work. The floor hump is contoured the same as the 69 floor.
I also have a mostly complete 69 Fury vert that I bought for interior and top parts. It is a rough rolling car with its 318 and auto trans still in the car. I have an open Indiana title for this car.
Also include is a set of Paisely door panels, complete dash, steering column, wiring harness from a 72 Fury I believe.
Both cars and the 4 speed pieces I will take $1500.00 for all. I will consider piecing it out as well but would like to get rid of all as a package.
69 300 L code rolling body. Has clean Indiana title in my name. I have the fender tag as well.
Has 8 3/4 housing and axles ( I will be removing the 3:23 SG for my use). It has disc brakes on the front. I have the hood and all the other body parts are on car. There is no interior for the car except for the dash. It has a top frame but no top. All hydraulics are there and original. I also have the driveshaft for the car. The body is the best part about it. It has a little rust in the lower quarters behind the rear wheels, couple holes in the drivers side floor pans, some in the windshield frame (I have repaired some of this), and needs a trunk floor.
I have a 4 speed factory floor hump, pedals, z bar, Zbar frame bracket, clutch rod that goes thru the firewall. The pedals are currently hanging in the car. All this was from a 67 Cbody but from mock up it looks like it would work. The floor hump is contoured the same as the 69 floor.
I also have a mostly complete 69 Fury vert that I bought for interior and top parts. It is a rough rolling car with its 318 and auto trans still in the car. I have an open Indiana title for this car.
Also include is a set of Paisely door panels, complete dash, steering column, wiring harness from a 72 Fury I believe.
Both cars and the 4 speed pieces I will take $1500.00 for all. I will consider piecing it out as well but would like to get rid of all as a package.