SOLD 727 Transmission with Gear Vendors Overdrive

Status
Not open for further replies.

Racingsnake

Member
Joined
Mar 11, 2021
Messages
91
Reaction score
42
Location
SoCal
Feedback: 0 / 0 / 0
Contact seller
727 transmission for big block with mild shift kit and Gear Vendors overdrive. Good working condition, recently removed from my '68 Fury (was keeping for another project but have decided to go with a stick instead). Also have driveshaft and PDQ torque converter $2,000obo

IMG_5342.jpeg


IMG_5343.jpeg
 
Did you have to do anything besides alter your transmission cross member to install this?
 
I had to clearance the floorpan slightly as well. I still have the modified crossmember and would include with the trans if wanted
 
What is the final ratio with OD engaged? I assume just one speed in the GV unit?

Did you use this to split gears or did it just work automatically when in 3rd?
 
It’s a 0.78 overdrive ratio. It can be used in any gear except reverse. I have the computer and speed sensor to set it up for automatic shifting but I just used a toggle switch on the dash to engage and disengage it.
 
Status
Not open for further replies.
Back
Top