So on a cool evening car started rough, I flooded the motor. towed it home. Popped the plugs, blew out the gas, dried it out. Carb float needed replaced. Now it wont start... What did I do?... Sounds....."hollow" when I crank it over. Just spins.... I can hear the 'cough' out of the pipe so I believe my compression is still good, and it occasionally does fire, but wont catch and idle... BTW, i did blow up the muffler, but it should still idle... The motor just doesn't quite sound right. The starter sounds like it's working 'extra' hard to crank the motor over also... So I'm bewildered... Going to pop the valve coves off and make sure they're moving alright, but I'm at a loss... Any ideas would be appreciated. I'm pretty handy, just replaced the frost plugs on the rear of the motor, had to remove tranny to do that, I've done head gaskets on my jeep and just replaced peripheral items on this Fury. But there's like 5 moving parts, so there's not that much that can go wrong... what am i missing?....