Cooling system Part 2

[1969 300]

Hello everyone,
I replaced the water outlet, as well as the thermostat. Since the coolant level dropped, I could see the cores of the radiator better. It looks like they are clogged with little white spheres, and about 50% of the opening is clogged on each core. Should I have it flushed, rodded, recored, or replace altogether? I don't want to do this in my house.
Thank you

 

[bluefury361]

It looks like they are clogged with little white spheres, and about 50% of the opening is clogged on each core. Should I have it flushed, rodded, recored, or replace altogether?

Are you experiencing over heating issues....? A professional flush wouldn't hurt.

 

[1969 300]

Yes, the engine boiled over after I had the A/C condenser installed.

 

[1969 300]

Does anyone know the stock radiator size? I'm looking at Champion radiators on Ebay, but the dimensions look too big...

 

[strokerpost]

You didn't mention what car, year, or engine, but you should be able to find the specs for your car here. Just scroll down to the year you need.
http://www.mymopar.com/radiatorspecs.htm

 

[1969 300]

Ok, I ordered a champion aluminum 3 row radiator (should get it tomorrow). Should I flush ther cooling system (block) before installing the new one?

 

[commando1]

Flushing the block and the heater core are an absolute must.

< Sent from my tablet >