dcjoe22
New Member
- Joined
- Sep 9, 2013
- Messages
- 20
- Reaction score
- 2
Hi guys,
I have a 66 Fury with drum brakes on the front. I have a single Master Cylinder. I had some squealing in my front brakes and I noticed the hubs and rims very extremely hot. I have replaced the wheel bearings, put on new drums and new shoes with all new brake hardware and my hub and rims still seem very hot to the touch after driving only 4 or 5 miles. I have taken rims off to double check everything, nut on wheel bearings not too tight & packed good with wheel bearing grease, brake hardware on correctly, no drag on brake adjustment, and still the same results. Brakes do not seem to be hanging up as I roll good of a stop. Any suggestions??
Dave
I have a 66 Fury with drum brakes on the front. I have a single Master Cylinder. I had some squealing in my front brakes and I noticed the hubs and rims very extremely hot. I have replaced the wheel bearings, put on new drums and new shoes with all new brake hardware and my hub and rims still seem very hot to the touch after driving only 4 or 5 miles. I have taken rims off to double check everything, nut on wheel bearings not too tight & packed good with wheel bearing grease, brake hardware on correctly, no drag on brake adjustment, and still the same results. Brakes do not seem to be hanging up as I roll good of a stop. Any suggestions??
Dave