HELP !What does it fit.

[boltupal]

I have this coolant overflow bottle for years. I dont know what came from.

 

[CBODY67]

Aftermarket. IF it was from an OEM, it would have a factory part number cast into it, possibly with a factory OEM logo, too.

 

[Jpap]

I have the same one, from a '70 chrysler 300..... also no numbers or OEM Logo onit..

 

[Big_John]

I have the same one, from a '70 chrysler 300..... also no numbers or OEM Logo onit..

Not original to '70 Chrysler.

 

[CBODY67]

One "give-away" is that the OEM jugs, usually had smooth, rounded corners and contours to fit in a particular location on the car. With cast-in mounting tabs rather than a strap around the neck, which could also serve as the mounting hardware.

 

[Big_John]

I have this coolant overflow bottle for years. I dont know what came from. View attachment 598543View attachment 598544View attachment 598545View attachment 598546

I think it's an aftermarket part.

 

[boltupal]

Thnaks guys

 

[boltupal]

Aftermarket. IF it was from an OEM, it would have a factory part number cast into it, possibly with a factory OEM logo, too.

If its after market , why doesnt it ahve mounting holes? It looks like it slides into a brackets

 

[boltupal]

One "give-away" is that the OEM jugs, usually had smooth, rounded corners and contours to fit in a particular location on the car. With cast-in mounting tabs rather than a strap around the neck, which could also serve as the mounting hardware.

So it mounts by that little ring around the filler neck?

 

[boltupal]

I have the same one, from a '70 chrysler 300..... also no numbers or OEM Logo onit..

Please post a picture of yours. Much thanks.

 

[Ross Wooldridge]

Th aftermarket ones often sat in a wire basket that had mounting tabs.

 

[Jpap]

Please post a picture of yours. Much thanks.

Here you go..

 

[413]

So if that is a factory tank mounted there where did the factory put the horns, receiver drier and vacuum tank?
@Jpap

pictured is a 70 new yorker with AC. No room for the tank there.

 

[Jpap]

Well, ...it aint an OEM part, so someone got really creative and found a free space to put it there....