azblackhemi
Old Man with a Hat
Of course I know this car. Tom has been over to my place a couple of times.
For Sale Not Mine but WOW !!!! 1970 Sport Fury E-Bay
- Thread starter Ironwolf
- Start date
- Status
Yeahrightgreer
Senior Member
Anyone ever seen a Fury vert in FP6? Pictures? I’ve seen 1 or 2 300 convertibles but never a Fury.
70Tom
Senior Member
I've put it back up on eBay with a best offer. But, I have a feeling it's still not going to sell until I fix that quarter panel, which I'm not looking forward to and I can't even do it right now as I don't even have the space to do so at the moment (working on a truck, which I desperately need for various projects).
But hey, someone offered me $5K for it....
Here's the link.
1970 Plymouth Fury Sport | eBay
But hey, someone offered me $5K for it....
Here's the link.
1970 Plymouth Fury Sport | eBay
Yeahrightgreer
Senior Member
It’s an awesome car. If you’re insistent on selling than you’ll have to be patient. A lot of petty buyers out there. Probably a Europeaner will get it but hopefully it stayed states side.
I still vote for keeping the car.
thrashingcows
Senior Member
Wow my old 70 Sport Fury (29 roof line as well) was a FP6 with matching FP6 interior with a V01 painted white roof.....could have been twins sitting side by side. But my old SF was a 318/904 car though. ;) This is a beautiful car and worth every penny IMHO. Hope someone gives it a good home.
fc7_plumcrazy
Old Man with a Hat
- Joined
- Aug 15, 2011
- Messages
- 5,315
- Reaction score
- 6,540
Unfortunately no.
brougham brummel
Well-Known Member
Hey guys.What causes filler to crack?Is it the mixing of the filler,was it humid when it was applied?Or did it not cure correctly.Just hate to see a pretty paint job get messed up.B.B
70Tom
Senior Member
It's totally my fault. I was in a rush to get it to paint due to time constraints and I didn't grind down my welds on the trunk side. I can almost guarantee you that there's pin holes that cause air to get behind the filler and caused it.
Usually the filler will crack because too much hardener was added to the mixture and the stuff sets up fast and brittle. Also can be issues if not enough hardener was used. In that case the mixture does not fully harden and remains porous, this can allow primer or paint to get into the filler and react with it, over time the filler will then shrink and crack. Point here is to follow the manufacturer recommendations on mixing the product, it is also very important to have the surface being filled to be clean and free of any rust or sanding debris.
Dave
azblackhemi
Old Man with a Hat
There are many reasons why filler can fail. In Tom's case judging by the picture it looks like an adhesion problem. It appears to have lifted off the surface and cracked. Can't tell for sure by the picture but that's my guess.
brougham brummel
Well-Known Member
Wow.Looks like using hardener is a science.But owner really did a beautiful job on car.I,m sure it can be fixed .B.B
- Status
Similar threads
