WANTED Rear Seat Belt Bracket 1970 Chrysler 300 Convertible

[Samplingman]

I need both left and right. I’m not sure what to call these, I couldn’t find a reference in the parts book, but my best guess is “rear seat lap belt reinforcement bracket - outer”. These bolt to the floor and then the belt bolts to the bracket.

The first pic are the bolt holes in my floor pan, the second is the best pic I could find of one in place. Please take a look and let me know what you have. If I can’t find originals I could probably mock something up, but would need measurements.

Thanks in advance!

 

[Snotty]

I just finished doing the interior in my'70 Newport. My rear belts had no bracket; the stud went through the belt mounting bracket (with the belt attached) straight into the hole. Nothing else.

From your pictures, I really don't know what I'm looking at or for.

 

[MrMoparCHP]

This is my 69 Polara 500 (the sedan was the same), belts just bolt to the floor.
The “rear seat lap belt reinforcement bracket - outer” is the bracket on the "outside" the car (under the floor pan)

Alan

 

[Samplingman]

I just finished doing the interior in my'70 Newport. My rear belts had no bracket; the stud went through the belt mounting bracket (with the belt attached) straight into the hole. Nothing else.

From your pictures, I really don't know what I'm looking at or for.

Interesting, so the bolt goes through the floor directly? Do you remember if your floor has two holes like my first picture above?

 

[Samplingman]

This is my 69 Polara 500 (the sedan was the same), belts just bolt to the floor.
The “rear seat lap belt reinforcement bracket - outer” is the bracket on the "outside" the car (under the floor pan)
View attachment 690768
View attachment 690767


Alan

Thanks Alan, mine is definitely different than what you show. There is no “outboard” bolt hole provision other than the two holes I show in the first pic. After looking through the FSM and the Assembly Manual, I’m thinking that the ‘70 with the bracket is a one year, convertible only piece.

 

[Big_John]

My '70 vert has those brackets. I'm looking for a pic....

 

[Big_John]

A couple bad pics with the belt bolted on. The Boss POS is gone if anyone cares.

 

[Samplingman]

A couple bad pics with the belt bolted on. The Boss POS is gone if anyone cares.

I see it, thanks. It has the plastic sleeved seat belt, I think the ‘69 was all cloth. I’ve looked through the parts book but can’t find a part number, yet the bracket is clearly pictured in the assembly manual. I might end up making one since bolting the plastic sleeved belt directly to the floor will not work.