WANTED Rear Seat Belt Eye Bolts

[Big_John]

I'm looking for 2 complete sets of 1965ish rear seat belt eye bolts.

I do not want generic eyebolts, so don't bother giving me links to the belt vendors please. I'd like the original Mopar pieces.

They look like this. PM me here. Scammers will be reported.

Pics by @azblackhemi and @Scoopy G

 

[detmatt]

Never seen those. Have you tried Murray?

 

[Big_John]

Never seen those. Have you tried Murray?

Not yet. If I don't find anything here, I'll give him a call.

 

[Big_John]

Bump

 

[USSMOPAR]

Back then seat belts were an accessory....look in the accessory catalog and accessory section of the parts manual for 64-5-6-7. There are both catalogs and parts listing for accessories in mopar parts. Once there is pn I would also check the superseded [ss] list catalog. Every model year mopar would publish a list of ss part numbers. There were inconsistancies in the books so every model yr would need to be checked. I only know of one entity with all these books and information, perhaps 2 but i never asked the other

 

[Big_John]

Back then seat belts were an accessory....look in the accessory catalog and accessory section of the parts manual for 64-5-6-7. There are both catalogs and parts listing for accessories in mopar parts. Once there is pn I would also check the superseded [ss] list catalog. Every model year mopar would publish a list of ss part numbers. There were inconsistancies in the books so every model yr would need to be checked. I only know of one entity with all these books and information, perhaps 2 but i never asked the other

I've done a lot of looking through the various parts books and haven't found a part number for just the eye bolt.

My '65 Barracuda was ordered with front and rear seat belts (I have the broadcast sheet) and the rear belts used this type of fastener in the rear. They were covered with factory undercoating and obviously never had been removed. From everything I've been able to find, they used eyebolts with the factory option rear belt in the C-body too.

When I added the seat belts to my 300L, I used 2 pairs of eye bolts and clipped the center seat belt to the same fasteners as the 2 outside belts. That's OK, but I kind of felt that the center belt should have its own fasteners, and Chrysler did have 6 "dimples" in the floor for what I would assume is 3 seat belts, so it seems to me that they provided locations for the center belt.

FWIW, if you ordered the Chrysler with rear seat belts, you just got 2 rear belts. Order code 478.

I could leave it as it is, and I'm sure it would be fine, but I'd like to find the original type eyebolts like the ones I used on the outside belts.