Rubbing Belts?

[65_imperial]

I was working on putting all my belts back on my 413 and the a/c and alternator belt seems to be rubbing against the power steering belt. Along with this, the a/c and alternator pulleys are not aligned at all. Do I have the wrong parts or is it something else?

 

[mopar preferred]

Wondering if the a/c pulley is wrong. Every picture I have seen so far has a double pulley, and double belts to the a/c and alternator. I see the alternator does have the double pulley.
Now don't take my word for gospel, it's just based on looking at pics on the net.
Somebody who knows for sure will be along shortly, I'm sure.

 

[bronze turbine]

I agree the compressor doesn't look right. There should be two thin belts on it.

 

[Toolmanmike]

I agree the compressor doesn't look right. There should be two thin belts on it.

Yep, look at how misaligned the ac belt is in the last photo. That's wrong.

 

[65_imperial]

I agree the compressor doesn't look right. There should be two thin belts on it.

So if my thinking is correct I could just replace the pulley then? I found this one on ebay but I’d like other opinions before I order it. For Chrysler New Yorker Dodge Dart & Plymouth Belvedere Satelite A/C Clutch DAC | eBay

 

[mopar preferred]

That looks like the correct type. I would contact the seller to verify fitment before you order.

 

[Trace 300 Hurst]

So if my thinking is correct I could just replace the pulley then? I found this one on ebay but I’d like other opinions before I order it. For Chrysler New Yorker Dodge Dart & Plymouth Belvedere Satelite A/C Clutch DAC | eBay

Yeah, that's the only compressor pulley that I've ever seen.

Definitely some tomfoolery going on there. Do you have an unused groove on the crank pulley? You'll need it!

Here's how you remove the pulley from the shaft. Easy as can be, but you must have the bolt that's mentioned. No puller needed or allowed. But you see where it says "support clutch with one hand"? When you tighten that 5/8" bolt about 1/8th of a turn from finger-tight the pulley will JUMP off the shaft and go right through your radiator.

 

[marty koirtyohann]

Wondering if the a/c pulley is wrong. Every picture I have seen so far has a double pulley, and double belts to the a/c and alternator. I see the alternator does have the double pulley.
Now don't take my word for gospel, it's just based on looking at pics on the net.
Somebody who knows for sure will be along shortly, I'm sure.

DID U REPLACE A PS PUMP OR PUT A DIFFERANT AC CPOMPRESSOR ON IT ? THE DOUBLE ALTENATOR PULLEY IS MADE FOR THE RV2 AC COMPRESOR& HEY R FREON 12 ONLY I SUPECT U CHAGED SOMETHING THST WAS NOT OEM . THE AC& LTENATOR USE MATCHED BELTS SOMEHING CANT BY ANYMORE / U USE TO BUY THE BELTS IN PAIRS TAPED TOGETHER OR WHEN U BOUGHT THEM FROM THE DEALER THEY WAS SOLD AS A MATCHED SET THEY WAS EXACTLY HE SAME LEGTH BELTS what did u change

 

[65_imperial]

DID U REPLACE A PS PUMP OR PUT A DIFFERANT AC CPOMPRESSOR ON IT ? THE DOUBLE ALTENATOR PULLEY IS MADE FOR THE RV2 AC COMPRESOR& HEY R FREON 12 ONLY I SUPECT U CHAGED SOMETHING THST WAS NOT OEM . THE AC& LTENATOR USE MATCHED BELTS SOMEHING CANT BY ANYMORE / U USE TO BUY THE BELTS IN PAIRS TAPED TOGETHER OR WHEN U BOUGHT THEM FROM THE DEALER THEY WAS SOLD AS A MATCHED SET THEY WAS EXACTLY HE SAME LEGTH BELTS what did u change

No, the ac and power steering are the same ones I’ve had since I purchased the car.

 

[bronze turbine]

My guess is previously the belts were installed differently, in a non-factory way? To me it looks like the same belt could go around both the compressor and power steering pulleys. It might work but it wouldn't be right.

 

[Trace 300 Hurst]

My guess is previously the belts were installed differently, in a non-factory way? To me it looks like the same belt could go around both the compressor and power steering pulleys. It might work but it wouldn't be right.

Criminally insane tomfoolery.

 

[bronze turbine]

Continuing with that train of thought the alternator would have had to have been with it's own belt because it doesn't line up with the compressor. Regardless, it's all wrong.

 

[65_imperial]

Continuing with that train of thought the alternator would have had to have been with it's own belt because it doesn't line up with the compressor. Regardless, it's all wrong.

I made a post earlier thats a little bit related to this, actually. The alternator was its own belt and ran underneath the water pump. Theres a nice little wear mark on the one I took off from that belt rubbing on it.

 

[Trace 300 Hurst]

Maybe these diagrams might help the conversation. From a 1970 Chrysler FSM, which means these should all be big-blocks.

Apparently there is a single belt application. Who knew?

 

[mopar preferred]

From your other post, I see the a/c was not previously connected?

 

[bronze turbine]

That pulley on the A/C compressor looks like it l belongs on a slant 6, IMO.

 

[lemondana]

The early up to 69 273-318 AC cars used that wider single belt. You have the wrong AC clutch and pulley setup and maybe more.

 

[Just Carbs]

Never seen a single belt A/C 65 440. Never seen that A/C pully on one either.

???????????????????????????????????????????? Instead.