Frankskustom
New Member
Hi i am having problème figuring out wich bracket to use for my ez fast injection kit does anybody can show me there set up câble for the kick down and gas câble please
Trhotlle bracket efi questions
- Thread starter Frankskustom
- Start date
twostick
Senior Member
AR Engineering has several different bracket solutions.
Throttle Bracket Kits | AR Engineering
The 413/440 tall adjustable one has the pivot for the kickdown linkage. I used that one on my stone age Holley Commander 950 TBI with an M1 single plane.
Kevin
Throttle Bracket Kits | AR Engineering
The 413/440 tall adjustable one has the pivot for the kickdown linkage. I used that one on my stone age Holley Commander 950 TBI with an M1 single plane.
Kevin
Frankskustom
New Member
Thanks a lot i will take a look at it
Darter6
Active Member
Here is one of theirs on a Gen2 Hemi single 4bbl..
Same as a RB. I used a cable kickdown but the factory set works too.
You may have to use a Edelbrock or Holley Mopar throttle adapter.
Not sure what EZ Fast uses.
Same as a RB. I used a cable kickdown but the factory set works too.
You may have to use a Edelbrock or Holley Mopar throttle adapter.
Not sure what EZ Fast uses.
Darter6
Active Member
Yes. In the photo (Edelbrock carb with Edelbrock adapter)
I had to trim the base of the adapter because of interference with the kick down cable attachment point during full throttle.
After cutting off the interference point I painted it silver. They come anodized gold.
Similar threads
