Search results for query: *

Needs more information and pictures.

Thought some you guys would like to see some of this paperwork that came with my 66 fury III. I bought it from a family in Washington I believe im the second owner. Also have the most of the registration slip from throughout the years and I believe I have more in my file cabinet at my...

Got it thx

Yes as Jefferson did not code A package codes like other plants did. You won't find many A series sales codes on a Jefferson plant tag (exceptions exist) Jefferson and Lynch Road plant had different tag coding protocols and formats compared to other plants.

Thank you. Yes, the car does not code for the Trailer Towing package so the hitch et al were probably added after purchase. However, it appears the buyer anticipated adding the hitch by buying the suspension.

Air is leaking by the rings, normal. Don't remove the valve cover, it's a waste of time. Remove the exhaust manifold, you will see the black soot at the leak, or a blown out manifold gasket.

I believe the raised ring around the wing nut is smaller in diameter on your air cleaner than the pie tin pictured...think the repop pie tins are made to fit the HP unsilenced or certain dual snorkel air cleaners

From FB Marketplace 1970 Chrysler 300 Hurst · Sedan · Driven 111,000 miles. Numbers matching car. New brake and gas lines installed. Gas tank replaced. Motor rebuilt from The Bomb Factory in New Orleans. Needs restored. No trades. Listed 2 days ago

idk if it runs fine and just has a noise I'd be looking for a cracked exhaust manifold or gasket leak...even up into the heat riser on the intake...I'd at least give it a compression test and/or leakdown test before I started pulling the head

HL2 is correct. That color is designed to match the color of your interior. I remember a thread where someone showed how that looks, after taking out the interior door panel foremother reason and using the opportunity to document the feature. @CBODY67 @saforwardlook

The R in the vin that's Windsor

Not at this point. If this doesn't cure it, I'll look into pinion angle and probably take the driveshaft over to a local driveshaft shop. I'm running out of driving time though... Winter is coming and I need to get a few things done before it gets too cold.

Thanks for the heads up on the mailbox. I’ve been trying to delete the messages and haven’t been able to. I’ve selected the boxes and trashed them. It then shows “no messages”, but when I try to send you a message it tells me the mailbox is full. Not sure what I’m doing wrong.

Probably, but pull the back drums and look at the wheel cylinders, rubber lines etc. I think the fluid is leaking past the seals and filling the rear, but I can't say I've ever seen that happen. Nope... There is no proportioning valve in a drum brake car. People like to call the distribution...

Keep us posted! Are you going to follow-up at all on the out of phase issue? It seems worthwhile since you've got the drive shaft out of the car.

I have a 62. I know the hump is smaller in the 62 then the 61 do to the transmission change. Problem is that you can't find molded carpet for a 62, only the 61. 62's are all sewn. So has anyone ever attempted to put 61 carpet in a 62 and can say how it fits?

Well after many night and much frustration I got them to work properly. The whole problem was a grounding issue, but not where you might thing. I took the switch apart multiple times cleaning the contacts inside, one of the metal tabs that bends over to hold the switch together clamps onto a...

Thank you.

Did not anyone notice the extreme orange peel which is more than it should be even in 1978. This particular area is bad while other areas looked much better.

I think the tail shaft bearing is OK. I inserted the yoke and it seems to have a decent fit. Almost all of that sticks out of the trans with the short seal. I'm going to put a proper seal in it while it's apart and I'll polish up the yoke. NAPA had the front U-joints in stock and the rear...