Search results for query: *

I figured someone out there has tried this in the past with or without luck.......

I do not like the adjustment-thing....I had bad experiences with Mercedes parts: when you adjust it to hard, the stearingbox will break down -> lot`s of wear in the middle position, then you adjust it, but the wear at the left and right side is not so heavy and when you turn to the right or...

I will check that, when I am in the workshop

Can you try them first? What size is the center hole? Fords are commonly smaller that Chrysler cars. Will the wheel fit over part of the hub that sticks out fit not hit that or interfere with the dust cap? What is the backspacing. They look like the hub is out a lot and all the wheel is inboard.

Hi, I changed oil and filter and filled up with Dexron III, the revers is fully functional with very little slip, but the first two gears have a looooot of slip during start/acceleration. If the car is rolling, it seems to be good (3rd gear), so I think, I have to rebuild it. Yeah, to find the...

In Germany you can buy Dexron III -> I filled up the transmission with that oil

Hi, yes, my engine is stock and will be -> I have the 383cui Thanks, Lars

Excellent work, excellent results.

I have a 3.23 sure grip in my 68 Charger with a 6.1 and 5R45RFE transmission. It actually works very well with the overdrive. The first two gears of the 5 speed are lower than first gear of a 727 so you get the grunt off the line you would with the 727 and 3.55 gears. Plus in 5th gear, my...

Beautiful!

I used my factory console and shifter with the 5R45RFE truck transmission. You could use yours with the 904 or the 5R45RFE but not with the Nag1. The Nag requires its own shifter. I saw one guy in FBBO that was able to fit the Nag shifter into his 68 Charger console but it won't look stock. Here...

Not mine https://www.facebook.com/share/19p8jbJ4Yc/

Yes. There there are codes from two different model years. Also there is the 69 Paint code format (two characters) but the 70 interior code format (four characters)

Will mustang wheels go right on a 1966 fury w/4 1/2" lug spacing without problems.... mustang=4 1/2" also

Cool! Ist this mine in the back? You ar finding many very great cars! Do you know what happened to the ignition?

In my first post of the thread below you can see the brass contacts of the "limit switch" that basically tell the motor to stop running when the doors open and close. I was able to bend these back to a working position and resolve the issue with new plastic gears. Headlight Cover Motor Repair

Definitely could be a ground issue as @Big_John stated. In my case, the limit switch inside the motor stopped working which lead to the plastic gear getting stripped because the motor kept trying to close the doors after they were closed, which sounded like knocking inside the motor. If you...

And one more in the storage for wintertime...

selling a 727 12" xtm 19 spline Hughes converter with about a 1000 miles on it. 2000 stall about 400 rpms over stock but then gets more efficient for better torque and cooling. check out their web site. 600 new. selling for 250.00 shipped. Auburn,NY 13021.

Yes I know that car very well