Search results for query: *

Swap front tires side to side and see if it changes the pull.

What engine do you have a 383-2bbl or a 383-4bbl? The cam and. Compression ratio will be low on a 2bbl engine.

You can buy the domes new reproduction for $80 each.

Yes the vinyl top was added later. The factory did use vinyl top molding to separate the two paint colors.

I don't believe there are any good numbers from Wix or Napa still made today.

Fords used the inertia switch on every car they made, mustang, Tempo, Taurus, Probe, Ranger, F series gas truck, Right side in trunk on cars and right kick panel on trucks. Rockauto calls it a fuel pump cutoff switch. It can be tripped in some minor accidents and the car won't start so watch...

Do you have a console or bare floor? Do you have a inland or hurst mechanism? What is the build date of the car? Does it have a reverse lamp on the lower dash?

Your 67 has paint code EC2. So originally had a dark blue painted roof with a medium blue body. Paint code C is a C-body only color that looks really nice. I had a 67 New Yorker that color.

Yes rear one on engine to water valve, the valve to heater core, then heater core to front on engine.

If you have never done a rear main seal on a BB mopar then in the car on your back is a tough learning curve. Clean it up by pressure washer and Castrol super clean will help your diagnosis. Also won't hurt to have it clean for any tear down or engine removal. Check pressure sender, valve...

1 1/4" socket.

Doubt you will be making money doing this. Every step is expensive.

I had cars that did this smelly steering wheel. Only thing that worked was replacing it. Replace it with a factory wheel.

Call around and find a shop that likes doing smalll parts. Power window switches (any switches on the car) get ahold of @Devinism. He takes them apart. You take the brite parts to get rechromed. He rebuilds them. Done. Chrome shops don't want you to remove the chrome, especially when you...

Yes oil change is cheaper and easier than pulling heads.

Problem #3 for milky oil. Cylinder head ported too much and it's cracked, letting. coolant in the oil. Whatever it is sounds like you have to find out why it's doing that. Just know some aluminum heads won't clear a stock distributor on a BB mopar. They sell tall distributors now for this...

Get the tire with more load capacity. It will be a better tire for a big car. The current whitewalls are on the thin side, unfortunately. And they don't want to say how wide they are like the old days. Yes they look under inflated especially with 26 psi like the sticker, or 32 which most are...

Yes 0130 is January 30th. The six bolt valve cover heads also have the rocker shaft stand cast into the head, instead of the aluminum supports around the rocker shaft.

The first B5 blue is EB5 add it started in 1969. It was not a color in 1966. The B is the second digit for blue, not the first digit for year 1966. I know you read about cars and they say B5 blue for 1967 and 1968. Wasn't a color in those years.

H on your paint codes means 1972 is the first year for the paint. A 3 digit paint code from 1969 and newer Broadcast sheet and the first letter is the first year of the paint. The first letter is vey important, even though most paint store employees don't know what it means. Example...