Search results for query: *

How do I know what everyone has or hasn't seen on here? :) But no, there's no repository of pics of it. (nor of any of my cars, actually) There are a few scattered pics about, but nothing of the whole car, not for for-sale purposes. It's a nearly-rust-free car that reportedly was in CA...

I paid $184 for the 4 row with an internal trans cooler in my V10 Fury and it is working great. I did have to "adjust" a couple of the mounting bolt holes but other than that no problems at all. FYI I bought mine from DH Racing Parts on feebay. If you buy one of the cheaper ones and need to...

37 A

66-68 rotors - too expensive, and are <1" thick IIRC. 69-73 rotors - no. '74-up rotors - I don't know, but I doubt it. I doubt heavy '74-up cars share the same bearing sizes as the smaller cars. Look at the bearings and see where they are common. If you do find an interchange, then you need...

What is amperage rating? Thanks

The pinch weld is quite accessible, I used a small wire brush and a pick to prep and brushed on a thick coat of rubberized undercoat, really pushing into the crevice and then creating a bit of a bead in the little V channel. As I recall there were a couple of notches in the upper stamping that...

Maybe if the seller wasn't a mush-mouth using talk-to-text we could understand WTF he was trying to say about the car.

Its cool. She doesn't appear to be that well known, or the stuff she's been in is not either. We'll try somebody else tomorrow. Throw some vintage "cheesecake" at y'all. :)

That's a lot of coin for a 383-2, split seams on the seats and RWL tires with wheelcovers. Stepladder pics aren't the best, either.

Your clue was of no help for me. I never watched a show with that guy. Back into my snow cave!

Perhaps a modern-day equivalent could be useful? Amazon.com : 12volt audio reverberator

Don't post names, addresses, phone #s etc, in a webboard. There are too many bad actors out there.

Some years ago I made a water injection setup using a bottle of some sort, it had a tiny vent hole to allow air in, then had an aquarium stone attached to a hose in the bottle, then that hose attached to a vacuum hose on the engine. The aquarium stone decreased the flow rate. A bottle of fluid...

On the 19th of October, 1962, the USS Ranger (CVA-61) was helping to film a documentary about carrier pilots. The ship was entering San Francisco Bay, and two VF-96 Phantoms were being readied for launch. The film shot was supposed to capture a Phantom being launched off the deck, then climbing...

Rebuilt 3438171 Alternator dated 15 70. Has 2444478 single pulley. This part number is listed for 6-cylinder cars but is basically the same as the ones used on small and big block cars without AC. $125.00 plus shipping.

I certainly agree with that but I had great results with my fairly inexpensive repro Spectra CU332, which is not aluminum and was thoroughly coated in good black paint. Just checked....$326 at Rocky.

I had one full (difficult!) semester of Heat Transfer in engineering school and I can tell you this: Paint it matte black. From the web: The rate of heat transfer by emitted radiation is determined by the Stefan-Boltzmann law of radiation: Qt=σeAT4Qt=σeAT4, where σ = 5.67 × 10−8 J/s · m2 · K4...

If you have access to a Cricut, you could make a decal to perk it up. I don't know about the durability, but most of our car stuff leads a somewhat sheltered life nowadays (no snow, limited water, etc).

I've used several different ones over the years. I never had a problem with them.

So sad to hear about Gene's passing. My cousin just got to meet him and got his autograph at the Grand National Roadster Show.