Search results for query: *

To me, that sounds like your 2nd gear band is slipping, it works OK at moderate throttle, but at WOT it slips.it could be out of adjustment or your fluid level is low. make sure to check the level in neutral My$.02

Installed my painted grill on my 66 FURY III now I'm just waiting on Max wedge hood scoop to tie it all in

You'd almost swear this isn't Northern Iowa by the view.

Thank you Bill. Me too.

The part number is just a part number, if there is a date code on a part it is a different number and there are different date code systems in use. That part number doesn't come up on any list that I have. Do you have a distributor or an application you are looking for a distributor for? Alan

https://m.facebook.com/marketplace/item/1017877479832112/?ref=browse_tab 1969 Plymouth Fury III coupe in Dexter MN at $4,100. 318 new gas tank, power brake booster, non op ac and air. Per usual bad pictures and none of them are of the interior or under hood.

Probably no difference. Keep in mind that the signal seeking Delco radio (I assume that's what you are asking about) , was only available in Chryslers and Imperials, not Dodges.

It will work but you need to get it all. The disc assemblies from both sides, The proportioning valve, The booster, Master cylinder and Brake pedal hardware under the dash. You will probably find the booster and master cylinder will need rebuild and the calipers possibly rebuilt and new pads...

I’m very sorry to hear that you have to sell this car.

Description: 1972 Dodge Polara found in Oakland, Cal. Clear good Oklahoma Title. Transported to Oklahoma and restored to Black/White w/all markings, 2 sirens, PA, Grill lights, package tray rear CHP lights, Black spotlights - red and clear, CB radio, LED grill lights, motion detector that plays...

I have a new development with my 65 Sport Fury. It seems to shift properly up through the gears and does not slip. Now if I am cruising at say 50 mph, and floor it to kick in the passing gear, it doesn't kick down into a lower gear. It seems to go into neutral until I let up then it goes back...

None of the digits in the part number are tied to the date. HEI is a GM term for their electronic ignition, but since we can assume you are looking for an electronic distributor, you could rule out 1965 as that distributor still has points. Let's ask a question... DO you really need a date...

YB-60 in flight. a two and a half minute mini documentary. two built, none survive.

I've decided to extend my year of going to car shows that I've never been to. This show is in Clear Lake, IA and it's quite huge. Even got asked for my club affiliation so of course I mentioned FCBO! And yes there are some C-bodies here. So enjoy these ma Mopar (and other) pics.

So after getting the intake and carburetor back on my Fury, I went to fire it up and it was extremely hard to start. The carburetor is set correctly and everything was installed properly. Tons of photos were taken to make sure everything was installed as it was. After a couple of days of...

Hey y’all!!! I’m wondering if anyone has had to transport their project from one state to another and who did you use? I just moved from Iowa to Georgia but still need to bring my 300 down. It’s got no motor or transmission. It does have brakes and steers. I’m looking for cost efficiency because...

I saw the DIN plug, but didn't notice the 3 wires for the speakers. Good catch!

I contacted the owner in Calif and he will sell what's left in the car

1971 chrysler 300 original 440 auto pics in forum in El paso$5500

thanks you very much Ross