Search results for query: *

Can you pop them out from the back like a GM car? Or does the bezel and everything have to come out and replace them from the front ? One of my turn signal ones is broken

My flasher was behaving erratically when I turned on the signals: half the time it wouldn't flash, sometimes very slowly, sometimes worked fine. So I figured I'd buy an LED flasher so that I wouldn't have to worry about that stuff. I bought a CEC industries one. I tried it, no flashy at all...

Good news: I added that ester oil, and r152 (air in a can) works like a charm! Would definitely recommend! Bad news: still a leak somewhere :( the system is completely empty after less than 24 hours. I notice the gooey stuff covering the AC expansion valve glows green all over (green from...

First one came out so easy I felt confident and did the second one, only the center came out, so I poked at it with a pick, didn't help, how do I get this out ?

Gonna fille my AC system up, what's normal low side AC and high side pressure at idle? Thanks! It's 2.5 pounds right ? The shop manuals are confusing about this stuff hah thanks!

they look awfully similar, and my pass mirror is broken. also 83-89 fifth avenue

Found this at hobby lobby

so we know GM uses the rubber spacers, and ford pushed the bumpers forward, but how does chrysler mititage the 5mph bumper with NO damage to the body? the front header panel is all fiberglass isnt it? wouldnt it get damaged on a 5mph impact? the way i see these bumpers, i feel like if it got...

Good from far, far from good, still turns heads haha. Anywhere I can get touch up paint for this color ? 78 , it's a dark blue color. It's got a lot of chips actually.

I had the 4 channel radio with the two knobs on the left, swapped it out for a 2 channel radio with the knobs on both sides. The harness had the same wires, but only the left side of the speakers work. Is there something I need to do to get all 4 to work ? I know the difference between 2 ch...

There are two versions. the ones that say OCR should be scannable (using ctrl F) to find words. I perfomed OCR on them. but be careful with some of the words it recognized: it may have made a mistake!! The host is mine, i pay for it, and it's very slow. I apologize for that, be patient! So I...

The radio has the two knobs on the top left, I see some mopar radios with a dial on each side of the radio instead. Will it still fit the hole okay? Thanks!

my car has been repainted and a tiny part of the clear coat is starting to peel. It's only from here so far and the paint job is a quality pain job. . What would be the best way to stop this? I was thinking touch up clear coat brush? Or do I sand a little first? Any input or advice would really...

I have the 1978 shop manual, is this already available online ? I am thinking of making them available for download if they aren't readily available

I got the wiper motor out. I assume this is what a real 1978 wiper motor looks like (it's not a different year motor in my 78), and I assume that spring wrapped around the motor shaft is the spring that goes inside a replacement bushing. Am I missing washers or something? Or a bolt or anything...

Okay so I finally had time to take a look how to remove the radio, and it has some weird Chrysler removal bits. Lame. The removal procedure is as follows: 4 or 5 black screws along the bottom, you will have to be in your back for these. I recommend removing the 4 screws to remove the column...

It's been raining so much, finally got a break to take some photos. I just got this a few weeks ago! 400 with a quadrajet, it's pretty base model to be honest, the only real options (aside from standard) are the cornering lights and the telescoping steering wheel I think. Runs so smooth though...

Pretty much what the title says. I was driving down the road. The car runs perfectly fine. Very smooth, then out of nowhere the engine just died, my oil light came on and smoke was coming out the passenger side!! I grabbed my extinguisher and opened the hood as fast as I could!...I looked around...

I feel like there has to be some kind of glue I can use on this, please tell me there is, it's hanging by a thread haha

I just bought a 1978 Chrysler New Yorker 400ci, LOVE the car, but after driving around a while, the car warms up, then it struggles to start. Cranks great. After about 5 seconds of cranking it finally starts. It's got lean burn delete conversion from the factory. Is this gonna be something...