1966 Fury III - Unfinished Project

[Philip Andrews]

Cleaned the welds up.

 

[Philip Andrews]

Made a start on a replacement piece for the lower corner.

It's a triple compound shape.

Getting there though. These shall not be lead. They shall be steel. Much easier to fix when it rusts through again.

 

[Philip Andrews]

Slightly off topic- are these the correct door handles for a 66 Fury?

https://www.classicindustries.com/p...X0F0Db2BGO94cvAU73_gxsHW7bHBE0kBz_ZumoEm7yqLA

I have one handle missing the button and mechanism, but an not sure if it's original to the car.

There's another style, just looks to be cosmetically different:
MA1097 - 1963-66 Dart, Valiant, Barracuda; Outer Door Handle Set; with Push Buttons; RH and LH

Which is the right set? From the pictures I see, the top ones, but the listing says the lower ones. (Not that I trust the listing, mind...)

Phil

 

[Philip Andrews]

Persuaded the rest of the screws along the top to undo, most of which were just rusted blobs of metal and needed hammer and chisel to unscrew.

Cleaned the top of the channel. It's rusted in the stupidest places, like in the middle at the top. Guess the trim rubbed through the paint.