Hurst 300 Stripe Kits - Performance Car Graphics

[Mike Mancini]

Let me get some pricing together on a small run of each, say quantities of 25 and 50 and we can go from there.

 

[Mike Mancini]

Hi Guys,

OK so to do a small silkscreen run of the above pictured tire pressure and emissions decals would price them at $29.00 each to make it feasible. I would have to sell about 45 of them to break even. Let me know if this is of interest and if so, I could move ahead.

Thanks
Mike

 

[Samplingman]

Hi Guys,

OK so to do a small silkscreen run of the above pictured tire pressure and emissions decals would price them at $29.00 each to make it feasible. I would have to sell about 45 of them to break even. Let me know if this is of interest and if so, I could move ahead.

Thanks
Mike

I’ll go for a set.

 

[AL_Brad]

Info on 300 side stripes Mike. There are four separate pieces -

Stripe thickness:
T - 2/32
C - 4/32
L - 6/32
Gap - 10/32 (x2)
Total thickness - 1"

1/4 Length angled taper f/r:
T - 18.25
C - 17 5/8
L - 16.5

2/4 Length angled taper f (would need L&R):
T - 20
C - 19.75
L - 19.25

3/4 Length (door):
50" square at both ends

4/4 Length (rear qtr):
95" square at both ends

Any other 300 owners interested?

 

[Big_John]

Hi Guys,

OK so to do a small silkscreen run of the above pictured tire pressure and emissions decals would price them at $29.00 each to make it feasible. I would have to sell about 45 of them to break even. Let me know if this is of interest and if so, I could move ahead.

Thanks
Mike

I'll go for a set also.

It may be best to start another thread about this. Not everyone will see this thread.