Loving life! 2 years since my 67 Imperial GM full-size Disc Brake upgrade!

[Boydsdodge]

Hello, sorry for long delay , I'm not down in Arizona since April back in Canada for summer and my Lake Cabin in northern Saskatchewan and did not have good internet , offline so to speak, this week they put up a new cell tower and presto connected again. I have owned many GM vehicles and owned a professional tuning race car shop since the early 1990's, now retired. I have put these GM brakes on other cars and trucks, even on my 1965 Valiant Barracuda back in the day so I new that the adaptor to go to this brake is a flat plane not 3 dimensional as most other setups. I got the drawing and put it all together , thinking to just sell the adaptor plates and let everyone else make up their own spacers and bolts and brake lines. Easy after that or I could supply the plates and the spacers and the rest is just off the shelf parts at any parts store. Anyone who wants to get the parts to fix their Imperial can PM me and we can work out what the cost would be for the parts.

View attachment 677467

View attachment 677468

View attachment 677469

Thanks. Beautiful Imperial.

 

[fury fan]

Yes, the GM D52 caliper is a fabulous thing, especially its flat-plate mounting.

Did you find it an easy combination to make?
In my dabbling, I'm finding that the rotor hat-heights and rotor thickness really affect how thick the adapter plate is, or if it will even fit.

But I'm trying to fit an ~11" rotor in a 14" wheel, so that's less forgiving.
The 11" mid-70s A-B-E rotor fits the C-body drum spindle perfectly, but does not allow the adapter plate to fit, it puts the bolts into the ID of hte rotor area.
IIRC the plate was very close to rubbing the rotor, too.

 

[Tobias74]

Your inbox is full

 

[regr]

Hello guys, sorry about my mail box, I have limited internet at my Cabin in Saskatchewan. I will figure out the cost of the parts for 67 - 73 imperials. How many of you guys want the parts so I can get cost from my machine shop. Bye for now. Reg

 

[Tobias74]

Hello guys, sorry about my mail box, I have limited internet at my Cabin in Saskatchewan. I will figure out the cost of the parts for 67 - 73 imperials. How many of you guys want the parts so I can get cost from my machine shop. Bye for now. Reg

I will take a set

 

[67ImpCrown]

Hello guys, sorry about my mail box, I have limited internet at my Cabin in Saskatchewan. I will figure out the cost of the parts for 67 - 73 imperials. How many of you guys want the parts so I can get cost from my machine shop. Bye for now. Reg

I'm in. Thanks for doing this.

 

[Mr C]

Just a reminder that I am in from our chat in the spring.

 

[regr]

Hello guys, I'm checking on the cost to get the basic kits ready but I have texts on here and personal and I really don't know how many cars we need to get kits for , maybe it would be best if you PM me and we put this on iMessage or email personal rather than using this forum thread, As this app only works reliably when I'm in front of my laptop, I end up not getting messages till hours or even days later when on my cell phone. Please PM me for my iPhone number in Arizona . Thanks in advance. Reg

 

[regr]

I have now calculated the cost to make up GM Full-size rotor and caliper conversion kits including billet adapter brackets, grade 8 hardware, bearings and spacers. To allow you to use off the shelf at any parts store Full Size GM Ambulance or Police Disc Brake System.

This will allow you to take off your terrible shitty four piston Budd Disc Brakes on all 1967 - 1973 Imperials and send them off to the metal recycling pile while at the same time having a nice big shot of Single Malt Scotch as well a Cigar. Good riddens Budd brakes!!!

So far I have three members ordering so if you are wanting to fix your Imperial just PM me in the next few days if you're interested to order a kit, this might be the only time I will do this, I'm an old fart after all.

Regr

 

[regr]

Hello guys, hope everyone is doing well. I received just one deposit so far, are any here wanting to get the GM Brakes, I need at least 3 takers to get this stuff manufactured. I would like to do the order this week if possible as would be good to get it all done and sent out to before Christmas . Let me know by PM mail and I will send you my cell number.
Cheers for now.

Reg

 

[dge472]

Hi. Sent you a couple of Emails.

 

[regr]

Perfect, sent one back to you.

 

[Mr C]

I sent a quick confirmation question to the conversation...