Lower control arm and strut rod bushings- available?

[RJ Squirrell]

Looking for LCA and strut rod bushings for my 67 Polara-apparently Moog discontinued the K7007 LCA and the K7019 strut rod bushings- anyone know of, or have a stash of these?

 

[david hill]

O'Rielly Auto parts carries one part # K1007 confirmed today.

 

[detmatt]

I’ve gotten bushings from Murray Park and also Craig @mobileparts .

 

[RJ Squirrell]

Your right! just called Oreilleys- precision brand 7007 bushings 1 week lead time to get them- $18.98 ea and extra shipping charge $9

 

[RJ Squirrell]

And also wondering about my control arms, steam cleaned them last night, the sleeve that the arm pivots on- torsion bar socket seems a little sloppy- is this normal? I could grab the pivot shaft and wiggle it back and forth about 1/8" - the bushing was tight it is the arm itself that is moving

 

[detmatt]

I’m not saying it’s normal but I just went and checked a loose set from a 45k mile car and they have a similar wiggle. I wouldn’t worry about it.

 

[70bigblockdodge]

Cut half the bump mount loose, squeeze the control arm in a vice and reweld it. It should tighten up.

 

[mobileparts]

As Detmatt & many many more know,
I have them.
As per forum rules, you need to P.M. me, if you want them....

Craig

 

[RJ Squirrell]

Hey Craig do the NOS ones wiggle a little bit too?

 

[mobileparts]

I have no idea --- I don't work on cars....
I am the best parts man on planet Earth --- but I do not work on cars....
If it is any indication, I have NEVER had any issues, on any of these parts, period.

 

[RJ Squirrell]