WANTED Molding clips - '65 Fury - for bottom windshield molding strip that attaches to cowl cover

[barsteel]

Pic attached.

These are the clips for the bottom windshield molding that mounts on the cowl cover. Au-Ve-Co does NOT have them, nor was I able to find any on Ebay. Au-Ve-Co has similar clips, but they will NOT work.

The square portion of the clip is flatened so that it can fit into the molding channel.

I need 8 of them. Please msg me if you have them. Thanks...

Chris

 

[cbarge]

Tony's Parts in Delaware is parting out a pair of 68 300,so the clips should be the same.

Also try National Moparts in Beaverton,Ontario,Canada. Nigel has a yard with a number of C's parts cars.

Finally try Murray Park.

I was surprised Au-Vee-co did not have them. I had good luck using their products in the past.

 

[rkrochen]

You can try Spaenaur in Canada they have all kinds of fasteners and tools. They helped me get clips for my car.
Thought I might have some but only have 1 which doesn’t do you much good.

 

[Clay Harrison]

I have 7 of them. They need cleaned up but were in the trim and a bit@# to get out so they should work.
20 bucks shipped to CT. I only take payments thru FB.

 

[barsteel]

I have 7 of them. They need cleaned up but were in the trim and a bit@# to get out so they should work.
20 bucks shipped to CT. I only take payments thru FB.

SOLD!!!!!

Not sure how to send payment through Facebook. Email me at cmk1966@hotmail.com

 

[MoparMike]

if you are still looking for them I got mine for my 65 Monaco from R/T Specialties.

 

[barsteel]

if you are still looking for them I got mine for my 65 Monaco from R/T Specialties.

Mike -

Thanks for the tip, but I already got the clips.

Chris